<a name="p-3751-note-although-many-users-have-had-great-success-using-them-xiaomi-aqara-zigbee-devices-are-not-officially-supported-or-guaranteed-to-work-on-the-hubitat-elevation-platform-1" class="anchor" href="#p-3751-note-although-many-users-have-had-great-success-using-them-xiaomi-aqara-zigbee-devices-are-not-officially-supported-or-guaranteed-to-work-on-the-hubitat-elevation-platform-1" aria-label="Heading link"> NOTE: Although many users have had great success using them, Xiaomi / Aqara ZigBee devices are NOT officially supported or guaranteed to work on the Hubitat Elevation platform. I am maintaining a collection Xiaomi device drivers for Hubitat in a GitHub repository, at veeceeoh/xiaomi-hubitat . These …

Btw @veeceeoh , I have a smoke sensor as well... do you want to implement (or want me to implement) sensitivity setting in your DTH? Or a test command? I have the packet dump for these features... And... I ordered a funky little LLKZMK11LM... (who the hell is responsible for these codes?) Seems to b…

[image] veeceeoh: Are you seeing any temperature / humidity / pressure reports? No, nothing... most probably groups and scenes are supported, but the rest is just the result of copy-pasting firmware code from NXP's SDK. :slight_smile: [image] veeceeoh: Yay! The next question is: Does it …

[image] guyeeba: Btw @veeceeoh , I have a smoke sensor as well... do you want to implement (or want me to implement) sensitivity setting in your DTH? Or a test command? Oh yes please! Adding any functions not in the current driver would be very welcome. Since I don't own a smoke sensor, can yo…

[image] guyeeba: The built-in driver is fuctionally perfect, it just fills the logs with exceptions in every 5 minutes (when the 0xFF01 string arrives). I proposed a fix for @mike.maxwell above, if they implement it (or any other solution), the built-in driver will be just fine. If they decide t…

Could you test with this driver? Maybe small mods will make it work properly [image] Went back to smarthings [But came back] Why Hubitat Elevation I did the port and the on and off on the dumb switch report works too, but changing the colors doesn't work for me, tried on …

Question for the Xiaomi SME's. If a joined device sends another catchall mesaage, is that the device rejoining the mesh? I have my driver set to log any messages that they don't handle once joined and every now and then I see this. (very infrequently)

[image] veeceeoh: Btw @veeceeoh , I have a smoke sensor as well... do you want to implement (or want me to implement) sensitivity setting in your DTH? Or a test command? Oh yes please! Adding any functions not in the current driver would be very welcome. Since I don't own a smoke sensor, can y…

Some of my Aqara devices state their battery status as "-396%", for example the Xiaomi Aqara Leak Sensor with driver version 0.8 shows this: [image] Or the "Xiaomi Aqara Door/Window Sensor" with driver version 0.7.2: [image] I have reset the battery status but no luck.

[image] foreigner: Some of my Aqara devices state their battery status as "-396%" The percentage is just calculated from the raw voltage reading received from the sensor, which is clearly incorrect (0.522 V for your Leak Sensor, and 0.01 V for the Door/Window Sensor). That voltage value is d…

@veeceeoh Keith- Have you released the update to the driver that asked for sensitivity adjustment of the vibration sensor? Thanks for everything?

Hubitat

[Deprecated] Xiaomi / Aqara ZigBee device drivers (possibly may no longer be maintained)

Developers