Dead Z-wave Radio

[jtp10181]

Do a shut down from settings and unplug for 30 seconds. This is power off and fully restart the Z-Wave radio. A normal reboot does not power down the radios.

I just added this info to the Read First post since it seems to come up a lot, hopefully that will prevent some frustration for someone in the future.

@jtp10181

For partial or total loss of Z-Wave control (radio seems dead), before doing anything else please shut down the hub from settings and unplug for 30 seconds, then re-plug to boot back up. This will allow the radios to fully power down and restart. A regular reboot only restarts the platform and not the radio hardware.