You have a bunch of ghosts...left over from device or devices that didn't join successfully and can really screw up your Z-Wave mesh.
- Shut down the hub, pull power when the hub says it's off, wait 30s, restore power and let the hub boot up. That will clear your Z-Wave radio so it's "fresh" for the next steps. Doing this might resolve/clear some of those ghosts...
- After the hub boots up go back to Z-Wave Details page and for each of those devices still showing Rebuild/Discover/Refresh, select Refresh and you should see a Remove button appear, and then hit that to tell the hub to try to remove the ghost. More info here, in particular section 3 in the guide for detailed steps/info on removing ghosts w/the hub's built-in tools:
