Custom Device Drivers [Wiki]

csteele · June 27, 2018, 7:34am

Right click on LOGS in the left pane, "open in new tab", leave it open in that browser tab for the rest of your life That's it. The logs appear as things happen beginning then, not before. When you first open logs, it's always blank. As events occur, they appear on that tab. It opens with "All" and you can click either on the name of each device that has had an event at the top, or on the number on the left of each log record. Hover over the names at the top to see the device/app number that matches the left column.

andrew.moyle · June 27, 2018, 7:46am

Ok, thanks for that, was expecting to see a history of live logging somewhere, but yes i understand now.

csteele · June 27, 2018, 7:48am

"History" is in the Events link for each individual device.

When Live logs get sluggish switching between devices, refresh the page which clears everything back to blank. Once live logs reach 10's of thousands of records, the web page takes a while to switch between devices or from All to a device.

cuboy29 · August 9, 2018, 3:57pm

Add DSC-Envisalink and Bloomsky to the list (code ported over)

ttalele · August 9, 2018, 5:44pm

Very cool!! Do you when the code might be available? (or where we might find it?) Thanks again!!

chuck.schwer · August 9, 2018, 10:52pm

A post was split to a new topic: Bloomsky Integration

mike.maxwell · August 9, 2018, 10:12pm

we have capability pressure measurement now, there is no pressure unit attribute, it's standardized on kPa.
Usage can be seen in the Environmental Sensor driver I just published in our public get repo.

chuck.schwer · August 9, 2018, 10:51pm

A post was split to a new topic: Envisalink Integration

kilowatts · August 10, 2018, 3:07pm

Qubino Flush RGBW Dimmer works with only changing physicalgraph:

github.com

kjamsek/SmartThings/blob/master/DeviceHandlers/Qubino/RGBWDimmer/QubinoRGBWDimmer_1_0.groovy

/**
 *  Qubino RGBW Dimmer
 *	Device Handler 
 *	Version 1.0
 *  Date: 31.7.2017
 *	Author: Kristjan Jam&scaron;ek (Kjamsek), Goap d.o.o.
 *  Copyright 2017 Kristjan Jam&scaron;ek
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
 *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
 *  for the specific language governing permissions and limitations under the License.
 *
 *
 * |---------------------------- DEVICE HANDLER FOR QUBINO RGBW DIMMER Z-WAVE DEVICE -------------------------------------------------------|  
 *		This hanlder supports all features of the device (both normal and 4 Dimmer operating modes).

This file has been truncated. show original

kelpayne · August 11, 2018, 10:57pm

It might best if you add these to the Wiki list yourself. That way you can add a link to the drivers, etc.

Thanks.

bertabcd1234 · August 20, 2018, 12:47am

I added the "v5" ST motion sensor, the new "2018"/ZigBee 3.0 model, to this list. The official model number is IM6001-MTP02, which I've also included since it's getting hard to keep track of the generations of these--so hard that I'm not sure if v4 is unintentionally missing from the list above (there's the original Kickstarter model with optional micro USB power, the v2/2014 model with a large sensor in the middle, the v3/2015 model with a small sensor in the upper left corner, the v4/2016 sensor with a larger sensor in the same corner in a slight indentation, and the v5/2018 sensor that looks somewhat similar to v2 from the front but with a smaller sensor and including a mount). They also all take different batteries, so that could be another way to tell them apart. (I don't see it in the "list of incompatible devices thread," either, by the way--and I'd be shocked if it didn't work, at least as well as it ever does work given its mixed reviews.)

tl;dr Has anyone tried the "v4"/2016 sensor? I suspect it is just unintentionally missing from this list (assuming I'm counting the generations correctly; see above or this list from SmartThings.)

mike.maxwell · August 20, 2018, 12:58am

To be considered official i need the fingerprint so i can add it to the existing driver

stephack · August 20, 2018, 1:20am

It took reading a few times but I gotcha.

mike.maxwell · August 20, 2018, 1:23am

Yeah on cell no glasses lol...

Smartsmartsmart · September 23, 2018, 7:02am

Any chances of having Broadlink RM Pro and Bond Home integration working with Hubitat? Would be nice to have my ceiling fans automated so I don't have wake up in the middle of night to change the speeds.

bjcowles · September 23, 2018, 7:36am

I was researching Bond recently and saw they have an IFTTT channel. Your ceiling fan could be controlled with Hubitat now.

Smartsmartsmart · September 23, 2018, 8:52am

That sounds great. Has anyone tried it? A local integration will be even better but I can live with IFTTT for now.

cwwilson08 · September 23, 2018, 9:32am

I use my broadlink rm with node red. Works great. I actually prefer it over my harmony and for cube.

Smartsmartsmart · September 24, 2018, 6:12am

Can you please give more information on how Broadlink rm works with node red and how it links to Hubitat?

dhrowe · November 26, 2018, 6:55pm

I wonder if you might get more specific with your items. And maybe a small database?

By specific I mean version and or part numbers I notice a few do have them but most do not.

Specifically I have read that some GE Jasco switches are good, others not so much...

I would be nice to Newbie like me to say. Motion sensors: and get a list of them that worked.

I bought some c-life smart bulbs but i don't have google and I think they need to go back...