CMARS bulbs not working with hubitat

[user2548]

I am moving from smartthings to hubitat. I have three CMARS bulbs that pair with hubitat but don't work correctly. They only think that works is flash. The on and off don't do anything, except when the bulb is flashing off will turn it off. Nothing else works. Are these bulbs just not compatible with hubitat?

[aaiyar]

Which driver are they using?

This might be helpful:

This could be a good deal on two zigbee 3.0 RGBW bulbs and a zigbee 3.0 outlet

Here's the promised followup. The bulbs pair to Hubitat very easily as "Advanced Zigbee Bulb". They do not respond as anticipated with the "Advanced Zigbee RGBW Bulb" driver, but do work fine with the "Generic Zigbee RGBW Light" driver. The bulbs identify themselves as: [Untitled] CT ranges from 2700-6500K. The bulbs put out plenty of light in CT mode. Color reproduction in RGB mode is pretty good - at least as good as Sengled (examples below), but at a level of 100%, the lumens output is a…

[user2548]

Thanks, I had tried that and it didn't work. I've found that changing the driver to something else then back to Generic Zigbee RGBW Light got it working. It's still a little buggy but I think I can work around it.

[rlithgow1]

Whenever you change to a new driver, click configure. That may solve a lot of your issues.