I have a pair of zwave nodes that are unknown devices, cant be discovered when i click discover and when i hit refresh they just sit in pending forever until i reboot. If i click remove, nothing happens. These are the logs i have when i hit remove: 2022-07-08 05:39:12.530 pm Failed node 2E remove…

[image] deserthillsdrive: Unfortunately, I deleted them in devices on the HE and tried to pair them again and they partially bootstrapped and failed so there are 6 ghosts hanging out on the mesh Yes since you didn't remove the from hubitat prior to re pairing them, they won't pair properly ag…

I appreciate that. Sorry, there are more switches than three. The three giving me trouble are all located at the outdoor gazebo. They were working great with perfect mesh and then just lost connection. He has a C8, I did all the install work. Why do you think they fell off? I know there have been …

At this point though with 6 ghosts the mesh is trashed. I would attempt to remove them. (click the refresh button on each ghost line then click remove), If they won't remove you will need a z-wave stick to remove them to avoid redoing everything

Hubitat%20Remove%20Ghost%20Instructions.pdf

Thank you. It looks like there is a download for Mac and it will work. Is there a better stick that is recommended for success? I see the ones mentioned but just wanted to ask preference.

You will have to run paralells and then install a demo copy of windows 10/11 (free), The z-wave controller plug in for the si labs software is not available for Mac... If you have an Mx chip, you can install the arm version of windows 10/11. All in all removing ghosts takes about 5 mins. Any z-wave…

There is a lesson here, without intent to criticize. Being a nice guy can lead to long term misery. If a friend, neighbour, or family member wants to get into HA, lead them to documentation, and let them read and learn. Then guide them toward exploratory discovery. Be a teacher, not a doer. Best reg…

[image] deserthillsdrive: Needless to say, they all dropped off and are now ghosts. They refuse to connect now and I need to unwire them, bring them closer, exclude them, and then start over with a stronger mesh. I did not read all the other posts below yours in their entirety but largely the…

Those are insightful words of wisdom I am learning. I had such success with my C7 and then encouraged him to pick up a C8 and it will be easy. Ha.. Every step of the way has been like walking backward. I test everything at my house which is a mirrored flip, and it works fine. Then I get to his house…

When I did a wholesale transfer of devices off Vera and onto an HE C-8, I ended up with issues on outside-the-house Z-Wave outlets not pairing with the C-8, however, I was successful pairing them with my C-7. And that is how I left them. Both HEs are part of my network, with 6 devices on the C-7, an…

Hubitat

Cant remove zwave node

Get Help Devices

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled