Thank you @kkossev and @jw970065,
I placed an order for the Moes sensor and will test it when it arrives.
2 Likes
If it's the same shape, you can buy the cheapest one. They are all made by the same company. However, it is necessary to check whether the power supply is supplied. A stable power supply is very important.
And when connecting the power, the + - must be connected accurately.
To all that have tried the mmWave sensors, are these immune to cats and/or small dogs? If not how do you deal with it?
I don't have a dog and a cat.
There is a video where I tested the driver I developed @kkossev and shared the contents.
This video is for @kkossev, so it is not normally released.
I'm only revealing it for one more day.
At the bottom, there is a video of how the distance reacts.
I hope this will be a hint for you.
https://blog.naver.com/ispark0114/222815443522
3 Likes
This is a prank video with a presence sensor connected to HE.
(Sensitivity 3 / Fading time 1 second)
1 Like
I've got the Aqara FP1 sensor working with HE too, so very soon I will be able to compare the two different presence sensors side-by-side. Tuya and Aqara radars use different mmWave frequencies, so there should not be any interferences.
1 Like
It's so exciting news.
I have two FP1s, but they are useless now.
I own it because I expect you to breathe life into it.
It is the fastest when 'enter / leave' is triggered.
I ordered two Tuya presence sensors that I told you about, one has started shipping, and the other has not departed yet.
I don't know the exact meaning of this.
Does it mean that it can be a problem if you mix it in the same place?
The opposite - there should be no problems when placed very close in one and the same place.
1 Like
I understand what you mean.
I have a question.
Can I change the setting value of the sensor depending on the mode or the status of the switch?
For example...
If the A switch is On (or if the or mode changes when the current flows), change the setting value of the sensor (sensitivity 7, fading time 5).
If the distance is adjusted in this way, malfunction due to the movement of the companion animal in the absence can also be controlled.
In Korea, HE users are very few, so it is not easy to use properly through information.
Thanks to you, HE usage became happy. If it weren't for you, I'd cut back on HE use
Thank you again.
FP1 is used locally because ST edge drivers have been developed, but the speed is very slow.
And furthermore, the problem arises when FP1 sets up in a different way than Tuya.
To avoid noise, an area is set, but this method is not supported for ST.
I hope it can be used as a reference for development
I want to know the information about this product.
(Compared to the sensor that I like)
- Is the sensing ability faster than other sensors? Is it slow?
- What are the important factors that users can change?
- What can be used as a trigger?
I'm also curious about the sensor right above.
Hi @jw970065 ,
I don't have answers to your questions, because I don't have this sensor and I can not compare it the the others. In my opinion, it is too much expensive, probably because of the advertised 'fall down' function ... which efficiency is unknown.
From the information available on the net, the following parameters can be set for this sensor (MIR-HE200-TY):
- 'radar_sensitivity' 0..10
- 'radar_scene' - presets for sensitivity for presence and movement - 'default', 'area', 'toilet', 'bedroom', 'parlour', 'office', 'hotel',
- 'tumble_switch' On/Off
- 'fall_sensitivity' 0..10
- 'tumble_alarm_time' 0..5
The parameters/measurements received from the radar are:
- presence/occupancy
- illuminance
- 'motion_speed'
- 'motion_direction' - direction of movement from the point of view of the radar - 'standing_still', 'moving_forward', 'moving_backward',
- 'fall_down_status' - 'none', 'maybe_fall', 'fall',
- 'static_dwell_alarm'
All these commercially available at high price radar sensors are based on a just few base mmWave radar modules, that have normal low prices, but when put in a box and a Zigbee / Wifi module is added - the price of final product skyrockets .. 
1 Like
Thank you very much for your detailed reply.
Other than "sensitivity", it seems to follow the various settings specified. Even if I ask the dealer, there is no other information.
Even in my view, the price is twice as expensive.
My parents are very old. If this feature is really useful, you may need to buy it, even though it is expensive.
I will think about it more after using the 24Ghz sensor that I ordered now.
The return and 100% refund of this I purchased have been decided.
And the new product has arrived.
| Name | Value | Unit | Description Text | Source | Type | Date |
|---|---|---|---|---|---|---|
| illuminance | 29 | lx | DEVICE | 2022-08-03 02:55:23.373 PM KST | ||
| illuminance | 32 | lx | DEVICE | 2022-08-03 02:55:21.103 PM KST | ||
| illuminance | 35 | lx | DEVICE | 2022-08-03 02:55:19.971 PM KST | ||
| illuminance | 30 | lx | DEVICE | 2022-08-03 02:55:19.483 PM KST | ||
| motion | active | Detected motion | DEVICE | physical | 2022-08-03 02:55:18.544 PM KST | |
| powerSource | dc | device is back online | DEVICE | digital | 2022-08-03 02:55:14.254 PM KST |
Summary
dev:48182022-08-03 02:56:04.804 pm debug존재감지센서 벽부형1 test dp_id=2 dp=9 fncmd=157
dev:48182022-08-03 02:56:04.800 pm debug존재감지센서 벽부형1 test parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 0060090200040000009D, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 60, 09, 02, 00, 04, 00, 00, 00, 9D]]
dev:48182022-08-03 02:56:03.821 pm debug존재감지센서 벽부형1 test dp_id=2 dp=9 fncmd=154
dev:48182022-08-03 02:56:03.817 pm debug존재감지센서 벽부형1 test parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 005F090200040000009A, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 5F, 09, 02, 00, 04, 00, 00, 00, 9A]]
dev:48182022-08-03 02:56:02.807 pm debug존재감지센서 벽부형1 test dp_id=2 dp=9 fncmd=162
dev:48182022-08-03 02:56:02.803 pm debug존재감지센서 벽부형1 test parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 005E09020004000000A2, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 5E, 09, 02, 00, 04, 00, 00, 00, A2]]
dev:48182022-08-03 02:56:01.817 pm debug존재감지센서 벽부형1 test dp_id=2 dp=9 fncmd=181
dev:48182022-08-03 02:56:01.811 pm debug존재감지센서 벽부형1 test parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 005D09020004000000B5, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 5D, 09, 02, 00, 04, 00, 00, 00, B5]]
dev:48182022-08-03 02:56:00.814 pm debug존재감지센서 벽부형1 test dp_id=2 dp=9 fncmd=193
dev:48182022-08-03 02:56:00.808 pm debug존재감지센서 벽부형1 test parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 005C09020004000000C1, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 5C, 09, 02, 00, 04, 00, 00, 00, C1]]
dev:48182022-08-03 02:55:59.807 pm debug존재감지센서 벽부형1 test dp_id=2 dp=9 fncmd=79
dev:48182022-08-03 02:55:59.802 pm debug존재감지센서 벽부형1 test parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 005B090200040000004F, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 5B, 09, 02, 00, 04, 00, 00, 00, 4F]]
dev:48182022-08-03 02:55:58.806 pm debug존재감지센서 벽부형1 test dp_id=2 dp=9 fncmd=44
dev:48182022-08-03 02:55:58.802 pm debug존재감지센서 벽부형1 test parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 005A090200040000002C, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 5A, 09, 02, 00, 04, 00, 00, 00, 2C]]
dev:48182022-08-03 02:55:57.806 pm debug존재감지센서 벽부형1 test dp_id=2 dp=9 fncmd=57
dev:48182022-08-03 02:55:57.802 pm debug존재감지센서 벽부형1 test parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00590902000400000039, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 59, 09, 02, 00, 04, 00, 00, 00, 39]]
dev:48182022-08-03 02:55:56.815 pm debug존재감지센서 벽부형1 test dp_id=2 dp=9 fncmd=77
dev:48182022-08-03 02:55:56.810 pm debug존재감지센서 벽부형1 test parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 0058090200040000004D, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 58, 09, 02, 00, 04, 00, 00, 00, 4D]]
dev:48182022-08-03 02:55:55.816 pm debug존재감지센서 벽부형1 test dp_id=2 dp=9 fncmd=74
dev:48182022-08-03 02:55:55.811 pm debug존재감지센서 벽부형1 test parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 0057090200040000004A, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 57, 09, 02, 00, 04, 00, 00, 00, 4A]]
dev:48182022-08-03 02:55:54.980 pm debug존재감지센서 벽부형1 test dp_id=2 dp=9 fncmd=76
dev:48182022-08-03 02:55:54.816 pm debug존재감지센서 벽부형1 test parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 0056090200040000004C, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 56, 09, 02, 00, 04, 00, 00, 00, 4C]]
dev:48182022-08-03 02:55:53.809 pm debug존재감지센서 벽부형1 test dp_id=2 dp=9 fncmd=82
dev:48182022-08-03 02:55:53.805 pm debug존재감지센서 벽부형1 test parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00550902000400000052, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 55, 09, 02, 00, 04, 00, 00, 00, 52]]
dev:48182022-08-03 02:55:52.855 pm debug존재감지센서 벽부형1 test dp_id=2 dp=9 fncmd=119
dev:48182022-08-03 02:55:52.851 pm debug존재감지센서 벽부형1 test parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00540902000400000077, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 54, 09, 02, 00, 04, 00, 00, 00, 77]]
dev:48182022-08-03 02:55:51.862 pm debug존재감지센서 벽부형1 test dp_id=2 dp=9 fncmd=221
dev:48182022-08-03 02:55:51.857 pm debug존재감지센서 벽부형1 test parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 005309020004000000DD, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 53, 09, 02, 00, 04, 00, 00, 00, DD]]
dev:48182022-08-03 02:55:50.860 pm debug존재감지센서 벽부형1 test dp_id=2 dp=9 fncmd=213
dev:48182022-08-03 02:55:50.855 pm debug존재감지센서 벽부형1 test parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 005209020004000000D5, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 52, 09, 02, 00, 04, 00, 00, 00, D5]]
dev:48182022-08-03 02:55:49.851 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=198
dev:48182022-08-03 02:55:49.847 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 005109020004000000C6, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 51, 09, 02, 00, 04, 00, 00, 00, C6]]
dev:48182022-08-03 02:55:48.846 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=82
dev:48182022-08-03 02:55:48.842 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00500902000400000052, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 50, 09, 02, 00, 04, 00, 00, 00, 52]]
dev:48182022-08-03 02:55:47.848 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=76
dev:48182022-08-03 02:55:47.844 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 004F090200040000004C, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 4F, 09, 02, 00, 04, 00, 00, 00, 4C]]
dev:48182022-08-03 02:55:46.847 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=57
dev:48182022-08-03 02:55:46.842 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 004E0902000400000039, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 4E, 09, 02, 00, 04, 00, 00, 00, 39]]
dev:48182022-08-03 02:55:45.855 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=59
dev:48182022-08-03 02:55:45.850 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 004D090200040000003B, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 4D, 09, 02, 00, 04, 00, 00, 00, 3B]]
dev:48182022-08-03 02:55:44.853 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=55
dev:48182022-08-03 02:55:44.848 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 004C0902000400000037, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 4C, 09, 02, 00, 04, 00, 00, 00, 37]]
dev:48182022-08-03 02:55:42.847 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=57
dev:48182022-08-03 02:55:42.843 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 004B0902000400000039, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 4B, 09, 02, 00, 04, 00, 00, 00, 39]]
dev:48182022-08-03 02:55:41.846 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=58
dev:48182022-08-03 02:55:41.841 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 004A090200040000003A, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 4A, 09, 02, 00, 04, 00, 00, 00, 3A]]
dev:48182022-08-03 02:55:40.858 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=61
dev:48182022-08-03 02:55:40.853 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 0049090200040000003D, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 49, 09, 02, 00, 04, 00, 00, 00, 3D]]
dev:48182022-08-03 02:55:39.852 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=58
dev:48182022-08-03 02:55:39.847 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 0048090200040000003A, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 48, 09, 02, 00, 04, 00, 00, 00, 3A]]
dev:48182022-08-03 02:55:38.853 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=53
dev:48182022-08-03 02:55:38.848 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00470902000400000035, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 47, 09, 02, 00, 04, 00, 00, 00, 35]]
dev:48182022-08-03 02:55:37.847 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=46
dev:48182022-08-03 02:55:37.843 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 0046090200040000002E, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 46, 09, 02, 00, 04, 00, 00, 00, 2E]]
dev:48182022-08-03 02:55:36.846 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=50
dev:48182022-08-03 02:55:36.842 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00450902000400000032, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 45, 09, 02, 00, 04, 00, 00, 00, 32]]
dev:48182022-08-03 02:55:35.853 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=60
dev:48182022-08-03 02:55:35.848 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 0044090200040000003C, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 44, 09, 02, 00, 04, 00, 00, 00, 3C]]
dev:48182022-08-03 02:55:34.851 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=62
dev:48182022-08-03 02:55:34.846 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 0043090200040000003E, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 43, 09, 02, 00, 04, 00, 00, 00, 3E]]
dev:48182022-08-03 02:55:33.855 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=48
dev:48182022-08-03 02:55:33.850 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00420902000400000030, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 42, 09, 02, 00, 04, 00, 00, 00, 30]]
dev:48182022-08-03 02:55:32.848 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=41
dev:48182022-08-03 02:55:32.844 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00410902000400000029, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 41, 09, 02, 00, 04, 00, 00, 00, 29]]
dev:48182022-08-03 02:55:31.846 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=61
dev:48182022-08-03 02:55:31.842 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 0040090200040000003D, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 40, 09, 02, 00, 04, 00, 00, 00, 3D]]
dev:48182022-08-03 02:55:30.856 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=164
dev:48182022-08-03 02:55:30.851 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 003F09020004000000A4, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 3F, 09, 02, 00, 04, 00, 00, 00, A4]]
dev:48182022-08-03 02:55:29.947 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=77
dev:48182022-08-03 02:55:29.875 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 003E090200040000004D, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 3E, 09, 02, 00, 04, 00, 00, 00, 4D]]
dev:48182022-08-03 02:55:28.860 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=80
dev:48182022-08-03 02:55:28.855 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 003D0902000400000050, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 3D, 09, 02, 00, 04, 00, 00, 00, 50]]
dev:48182022-08-03 02:55:27.858 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=183
dev:48182022-08-03 02:55:27.854 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 003C09020004000000B7, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 3C, 09, 02, 00, 04, 00, 00, 00, B7]]
dev:48182022-08-03 02:55:26.854 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=216
dev:48182022-08-03 02:55:26.850 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 003B09020004000000D8, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 3B, 09, 02, 00, 04, 00, 00, 00, D8]]
dev:48182022-08-03 02:55:25.854 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=221
dev:48182022-08-03 02:55:25.850 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 003A09020004000000DD, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 3A, 09, 02, 00, 04, 00, 00, 00, DD]]
dev:48182022-08-03 02:55:24.855 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=68
dev:48182022-08-03 02:55:24.851 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00390902000400000044, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 39, 09, 02, 00, 04, 00, 00, 00, 44]]
dev:48182022-08-03 02:55:24.275 pm infoTuya Multi Sensor 4 In 1 Tuya check-in (application version is 41)
dev:48182022-08-03 02:55:24.271 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:08050100001801002041E2FF201FE4FF2001, dni:0805, endpoint:01, cluster:0000, size:18, attrId:0001, encoding:20, command:0A, value:41, clusterInt:0, attrInt:1, additionalAttrs:[[value:1F, encoding:20, attrId:FFE2, consumedBytes:4, attrInt:65506], [value:01, encoding:20, attrId:FFE4, consumedBytes:4, attrInt:65508]]]
dev:48182022-08-03 02:55:23.861 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=65
dev:48182022-08-03 02:55:23.856 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00380902000400000041, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 38, 09, 02, 00, 04, 00, 00, 00, 41]]
dev:48182022-08-03 02:55:23.374 pm infoTuya Multi Sensor 4 In 1 illuminance is 29 Lux
dev:48182022-08-03 02:55:23.372 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=104 fncmd=29
dev:48182022-08-03 02:55:23.368 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 0037680200040000001D, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 37, 68, 02, 00, 04, 00, 00, 00, 1D]]
dev:48182022-08-03 02:55:22.855 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=69
dev:48182022-08-03 02:55:22.851 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00360902000400000045, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 36, 09, 02, 00, 04, 00, 00, 00, 45]]
dev:48182022-08-03 02:55:21.853 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=60
dev:48182022-08-03 02:55:21.849 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 0035090200040000003C, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 35, 09, 02, 00, 04, 00, 00, 00, 3C]]
dev:48182022-08-03 02:55:21.104 pm infoTuya Multi Sensor 4 In 1 illuminance is 32 Lux
dev:48182022-08-03 02:55:21.102 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=104 fncmd=32
dev:48182022-08-03 02:55:21.098 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00346802000400000020, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 34, 68, 02, 00, 04, 00, 00, 00, 20]]
dev:48182022-08-03 02:55:20.866 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=46
dev:48182022-08-03 02:55:20.862 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 0033090200040000002E, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 33, 09, 02, 00, 04, 00, 00, 00, 2E]]
dev:48182022-08-03 02:55:19.972 pm infoTuya Multi Sensor 4 In 1 illuminance is 35 Lux
dev:48182022-08-03 02:55:19.970 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=104 fncmd=35
dev:48182022-08-03 02:55:19.966 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00326802000400000023, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 32, 68, 02, 00, 04, 00, 00, 00, 23]]
dev:48182022-08-03 02:55:19.854 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=40
dev:48182022-08-03 02:55:19.850 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00310902000400000028, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 31, 09, 02, 00, 04, 00, 00, 00, 28]]
dev:48182022-08-03 02:55:19.574 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=62
dev:48182022-08-03 02:55:19.570 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 0030090200040000003E, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 30, 09, 02, 00, 04, 00, 00, 00, 3E]]
dev:48182022-08-03 02:55:19.483 pm infoTuya Multi Sensor 4 In 1 illuminance is 30 Lux
dev:48182022-08-03 02:55:19.482 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=104 fncmd=30
dev:48182022-08-03 02:55:19.478 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 002F680200040000001E, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 2F, 68, 02, 00, 04, 00, 00, 00, 1E]]
dev:48182022-08-03 02:55:19.330 pm infoTuya Multi Sensor 4 In 1 Radar DP_103 (Debug CLI) is 32
dev:48182022-08-03 02:55:19.329 pm debugTuya Multi Sensor 4 In 1 dp_id=3 dp=103 fncmd=32
dev:48182022-08-03 02:55:19.324 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 002E6703000120, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 2E, 67, 03, 00, 01, 20]]
dev:48182022-08-03 02:55:19.241 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=71
dev:48182022-08-03 02:55:19.235 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 002D0902000400000047, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 2D, 09, 02, 00, 04, 00, 00, 00, 47]]
dev:48182022-08-03 02:55:19.155 pm infoTuya Multi Sensor 4 In 1 (dp=102) reported Radar fading time is 15 seconds (150)
dev:48182022-08-03 02:55:19.153 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=102 fncmd=150
dev:48182022-08-03 02:55:19.148 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 002C6602000400000096, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 2C, 66, 02, 00, 04, 00, 00, 00, 96]]
dev:48182022-08-03 02:55:19.067 pm infoTuya Multi Sensor 4 In 1 (dp=101) reported Radar detection delay is 0.1 seconds (1)
dev:48182022-08-03 02:55:19.065 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=101 fncmd=1
dev:48182022-08-03 02:55:19.059 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 002B6502000400000001, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 2B, 65, 02, 00, 04, 00, 00, 00, 01]]
dev:48182022-08-03 02:55:18.944 pm infoTuya Multi Sensor 4 In 1 Radar self checking status is 1
dev:48182022-08-03 02:55:18.942 pm debugTuya Multi Sensor 4 In 1 dp_id=4 dp=6 fncmd=1
dev:48182022-08-03 02:55:18.937 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 002A0604000101, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 2A, 06, 04, 00, 01, 01]]
dev:48182022-08-03 02:55:18.843 pm infoTuya Multi Sensor 4 In 1 (dp=3) reported Radar Minimum detection distance is 0 m
dev:48182022-08-03 02:55:18.842 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=3 fncmd=0
dev:48182022-08-03 02:55:18.837 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00290302000400000000, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 29, 03, 02, 00, 04, 00, 00, 00, 00]]
dev:48182022-08-03 02:55:18.816 pm infoTuya Multi Sensor 4 In 1 Radar sensitivity is 9
dev:48182022-08-03 02:55:18.814 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=2 fncmd=9
dev:48182022-08-03 02:55:18.725 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00280202000400000009, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 28, 02, 02, 00, 04, 00, 00, 00, 09]]
dev:48182022-08-03 02:55:18.631 pm infoTuya Multi Sensor 4 In 1 Radar Maximum detection distance is 9.5 m
dev:48182022-08-03 02:55:18.630 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=4 fncmd=950
dev:48182022-08-03 02:55:18.625 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 002704020004000003B6, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 27, 04, 02, 00, 04, 00, 00, 03, B6]]
dev:48182022-08-03 02:55:18.543 pm infoTuya Multi Sensor 4 In 1 Detected motion
dev:48182022-08-03 02:55:18.540 pm debugTuya Multi Sensor 4 In 1 (DP=0x01) motion event fncmd = 1
dev:48182022-08-03 02:55:18.539 pm debugTuya Multi Sensor 4 In 1 dp_id=4 dp=1 fncmd=1
dev:48182022-08-03 02:55:18.534 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00260104000101, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 26, 01, 04, 00, 01, 01]]
dev:48182022-08-03 02:55:18.447 pm warnTuya Multi Sensor 4 In 1 NOT PROCESSED Tuya descMap?.command = 11 cmd: dp=null value=null descMap.data = [00, 0B, 42]
dev:48182022-08-03 02:55:18.442 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 11 01 000B42, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:11, direction:01, data:[00, 0B, 42]]
dev:48182022-08-03 02:55:17.860 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=71
dev:48182022-08-03 02:55:17.856 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00240902000400000047, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 24, 09, 02, 00, 04, 00, 00, 00, 47]]
dev:48182022-08-03 02:55:16.857 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=76
dev:48182022-08-03 02:55:16.853 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 0023090200040000004C, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 23, 09, 02, 00, 04, 00, 00, 00, 4C]]
dev:48182022-08-03 02:55:15.854 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=85
dev:48182022-08-03 02:55:15.850 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 00220902000400000055, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 22, 09, 02, 00, 04, 00, 00, 00, 55]]
dev:48182022-08-03 02:55:14.853 pm debugTuya Multi Sensor 4 In 1 dp_id=2 dp=9 fncmd=75
dev:48182022-08-03 02:55:14.849 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 EF00 01 01 0040 00 0805 01 00 0000 02 01 0021090200040000004B, profileId:0104, clusterId:EF00, clusterInt:61184, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:02, direction:01, data:[00, 21, 09, 02, 00, 04, 00, 00, 00, 4B]]
dev:48182022-08-03 02:55:14.417 pm debugTuya Multi Sensor 4 In 1 write attribute response is success
dev:48182022-08-03 02:55:14.414 pm debugTuya Multi Sensor 4 In 1 parse(_TZE200_ztc6ggyl) descMap = [raw:catchall: 0104 0000 01 01 0040 00 0805 00 00 0000 04 01 00, profileId:0104, clusterId:0000, clusterInt:0, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:0805, isClusterSpecific:false, isManufacturerSpecific:false, manufacturerId:0000, command:04, direction:01, data:[00]]
dev:48182022-08-03 02:55:14.030 pm infoTuya Multi Sensor 4 In 1 installed()
1 Like
Thank you for the feedback! ( and congrats on the successful return and refund of the 'fake radar' that is actually a PIR sensor!)
So this mmWave radar which is suitable for mounting on a wall has the same firmware, as the radars that we have already tested. These perform very well in my setup as well ( I have 2 of these working on my home main hub), and so far all is good. My only concern is that they are too much 'chatty' reporting the distance. It will be great if there was a way to disable the distance reporting, but I haven't found if this is possible or not.
1 Like
Take a look at the test video.
The first evaluation, the best sensor I like, seems to be its performance.
Of course, the actual placement test is not enough, so we will check it again.
https://blog.naver.com/ispark0114/222832624821
This is a comparison test between the ceiling type sensor and the wall type sensor.
Next time, we will test it in the same location.
Both of them have fast ceiling types of 0.171 seconds when mounted on the ceiling.
1 Like
I hope you find a good solution.
The performance of this sensor is very good. Sensing speed is also good.
By the way, in my experience, if you reconnect the power, you need to reconnect it, not pair it. I don't know why this is.
1 Like
Can you clarify this?
Once a Zigbee device is paired successfully to HE, if it loses power and is switched back on later, the device will re-join automatically the HE Zigbee network. There is no need to pair it again.
Also, can you post what is the Manufacturer ID of the last sensor (the square one, wall mounted)
1 Like
