So the ZOOZ Z-WAVE PLUS 700 SERIES UNIVERSAL RELAY ZEN17 WITH 2 NO & NC RELAYS (20A, 10A) device would replace this whole controler right? Then, if I wanted, I could have switches to manually control the up / down relays connected to the Zooz?
Could someone help me understand this electrically and how this would wire up? I measured the power coming out of the relays on the current controller and I'm seeing 12v on the meter. Guess I don't really understand that. There's only four wires going upto the screen motor:
- RED - Down
- BLACK - Up
- White is connected to the 110v Common
- Ground is connected to the 110v Ground
I found this and it seems to match what I have.
Is it as simple as cutting the old controler out, connecting the RED and BLACK to the Zooz's two relays, and playing around with settings in Habitat? Or am I going to cause fires?