Z-wave transmitter appears to fail daily

[jtp10181]

After at least 12 active hours since last hub reboot, lets see the Logs > Devices Stats screen. Just the top page when scrolled to the top using the default sort. Screenshot, turn on all columns and show the full page including headers and stats at top.

Also, at the same time, lets see the entire z-wave details page. You will need multiple screenshots or a scrolling capture.

Check over this info as well:

@jtp10181

Z-Wave Issues

For partial or total loss of Z-Wave control (radio seems dead), before doing anything else please shut down the hub from settings and unplug for 30 seconds, then re-plug to boot back up. This will allow the radios to fully power down and restart. A regular reboot only restarts the platform and not the radio hardware.

Z-Wave Details Page Docs: Z-Wave Details | Hubitat Documentation

• How is Hub being powered? Supplied power block or other (explain)
  • PoE power (with splitter) is known to cause major Z-Wave issues on the C-8 hub.
  • See this post for detailed write up on PoE testing: PoE and the C8 (with extensive testing)
• Provide screenshots showing entire Z-Wave details Page
• Provide screenshot of Z-Wave Topology Map (red/blue squares)