Replaced my ejector pump and installed this pump controller instead of a basic pump switch. Any thoughts on what I can use with these normally open or normally closed connections that would allow me to integrate with HE over Z Wave (or Zigbee)? [1000012351] [1000012352] [1000012424] [1000012350…

The documentation references a security/alarm system, likely the only trigger for the Remote Connection terminals is when the Deluxe Float Controller is in an alarm state. Problems with power, pump, float, high water, whatever it's setup to monitor. :person_shrugging: If you want to monitor when y…

[image] es_ferret: what I can use with these normally open or normally closed connections Battery [image] Wired [image]

I believe zooz zen16 or zen17 would work as well.

I admit, I was looking at the Zooz relays before I posted, but I'm a bit aloof as to how to properly connect them.

The Zen16 would offer loads more (3 inputs/3 outputs) for future options. Zen16 vs Zen17 [image] [DRIVER] Zooz Relays Advanced (ZEN16, ZEN17, ZEN51, ZEN52) Custom Drivers Zooz Relay Drivers with the goal of exposing all advanced features and settings. If you are using t…

So these screw terminals on the controller seem to be their own normally open or normally closed dry contact relay (depending which connection I make). Would I connect those to the switch input and neutral on one of the Zooz relays? Would the Zooz relay then indicate closed (or open) - indicating th…

I use an Ecolink Z-wave battery powered contact sensor. Maybe a battery powered device would be best, just in case.

Z Wave integration with pump controller

Get Help Integrations

Ranchitat June 28, 2025, 9:52pm 5

The Zen16 would offer loads more (3 inputs/3 outputs) for future options.
Zen16 vs Zen17