I think this is probably the correct Color RGBW driver...
I'll try it out when my bulb comes on Thursday. At this point there's probably no point in sniffing the traffic since I think we all know what needs to happen based on @mike.maxwell comments and the behavior of your ported driver. 
And I was so looking forward to the experiment too.
1 Like
I did the port and the on and off on the dumb switch report works too, but changing the colors doesn't work for me, tried on another bulb, so now I have 2 color bulbs, one with the classic driver and the other with the color driver.
/**
* Copyright 2017 SmartThings
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
* in compliance with the License. You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
* for the specific language governing permissions and limitations under the License.
*
* Author: SmartThings
* Date: 2016-01-19
*
* This DTH should serve as the generic DTH to handle RGBW ZigBee HA devices
*/
metadata {
definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings", runLocally: true, minHubCoreVersion: '000.019.00012', executeCommandsLocally: true) {
capability "Actuator"
capability "Color Control"
capability "Color Temperature"
capability "Configuration"
capability "Refresh"
capability "Switch"
capability "Switch Level"
capability "Health Check"
capability "Light"
attribute "colorName", "string"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0702,0B05,FC03,FC04", outClusters: "0019", manufacturer: "sengled", model: "E11-N1EA", deviceJoinName: "Sengled Element Color Plus"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0702,0B05,FC03,FC04", outClusters: "0019", manufacturer: "sengled", model: "E12-N1E", deviceJoinName: "Sengled Element Color Plus"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "SYLVANIA Smart Flex RGBW"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "SYLVANIA Smart A19 RGBW"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "SYLVANIA Smart BR30 RGBW"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "SYLVANIA Smart RT5/6 RGBW"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY FLEX OUTDOOR RGBW", deviceJoinName: "SYLVANIA Smart RGBW Flex"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01, FC08", outClusters: "0003, 0019", manufacturer: "LEDVANCE", model: "RT HO RGBW", deviceJoinName: "SYLVANIA Smart RT HO RGBW"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01", outClusters: "0019", manufacturer: "LEDVANCE", model: "A19 RGBW", deviceJoinName: "SYLVANIA Smart A19 RGBW"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01", outClusters: "0019", manufacturer: "LEDVANCE", model: "FLEX Outdoor RGBW", deviceJoinName: "SYLVANIA Smart Flex RGBW"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01", outClusters: "0019", manufacturer: "LEDVANCE", model: "FLEX RGBW", deviceJoinName: "SYLVANIA Smart Flex RGBW"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01", outClusters: "0019", manufacturer: "LEDVANCE", model: "BR30 RGBW", deviceJoinName: "SYLVANIA Smart BR30 RGBW"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01", outClusters: "0019", manufacturer: "LEDVANCE", model: "RT RGBW", deviceJoinName: "SYLVANIA Smart RT5/6 RGBW"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01", outClusters: "0019", manufacturer: "LEDVANCE", model: "Outdoor Pathway RGBW", deviceJoinName: "SYLVANIA Outdoor Pathway Full Color"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01", outClusters: "0019", manufacturer: "LEDVANCE", model: "Flex RGBW Pro", deviceJoinName: "SYLVANIA Smart Flex 11 RGBW"
fingerprint profileId: "0104", inClusters: "0000, 0004, 0003, 0006, 0008, 0005, 0300, FFFF, 1000", outClusters: "0019", manufacturer: "Aurora", model: "RGBBulb51AU", deviceJoinName: "Aurora RGBW GLS Lamp"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, FFFF", outClusters: "0019", manufacturer: "Aurora", model: "RGBBulb51AU", deviceJoinName: "AOne Smart RGBW GLS Lamp"
fingerprint profileId: "0104", inClusters: "0000, 0004, 0003, 0006, 0008, 0005, 0300", outClusters: "0019", manufacturer: "LEEDARSON LIGHTING", model: "5ZB-A806ST-Q1G", deviceJoinName: "Ozom Multicolor Smart Light"
fingerprint profileId: "0104", inClusters: "0000, 0004, 0003, 0005, 0006, 0008, 0300, 1000", outClusters: "0019", manufacturer: "innr", model: "RB 285 C", deviceJoinName: "Innr Smart Bulb RGBW"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0702, 0B05, FC03", outClusters: "0019", manufacturer: "sengled", model: "E11-U3E", deviceJoinName: "Sengled Element Color Plus"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0702, 0B05, FC03", outClusters: "0019", manufacturer: "sengled", model: "E11-U2E", deviceJoinName: "Sengled Element Color Plus"
}
// UI tile definitions
tiles(scale: 2) {
multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
}
tileAttribute ("device.level", key: "SLIDER_CONTROL") {
attributeState "level", action:"switch level.setLevel"
}
tileAttribute ("device.color", key: "COLOR_CONTROL") {
attributeState "color", action:"color control.setColor"
}
}
controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
state "colorTemperature", action:"color temperature.setColorTemperature"
}
valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
state "colorName", label: '${currentValue}'
}
standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
}
main(["switch"])
details(["switch", "colorTempSliderControl", "colorName", "refresh"])
}
}
//Globals
private getATTRIBUTE_HUE() { 0x0000 }
private getATTRIBUTE_SATURATION() { 0x0001 }
private getHUE_COMMAND() { 0x00 }
private getSATURATION_COMMAND() { 0x03 }
private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
// Parse incoming device messages to generate events
def parse(String description) {
log.debug "description is $description"
def event = zigbee.getEvent(description)
if (event) {
log.debug event
if (event.name == "level" && event.value == 0) {}
else {
if (event.name == "colorTemperature") {
setGenericName(event.value)
}
sendEvent(event)
}
}
else {
def zigbeeMap = zigbee.parseDescriptionAsMap(description)
def cluster = zigbee.parse(description)
if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
if(zigbeeMap.attrInt == ATTRIBUTE_HUE){ //Hue Attribute
state.hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
runIn(5, updateColor, [overwrite: true])
}
else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
state.saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
runIn(5, updateColor, [overwrite: true])
}
}
else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
if (cluster.data[0] == 0x00){
log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
}
else {
log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
}
}
else {
log.info "DID NOT PARSE MESSAGE for description : $description"
log.debug zigbeeMap
}
}
}
def updateColor() {
sendEvent(name: "hue", value: state.hueValue, descriptionText: "Color has changed")
sendEvent(name: "saturation", value: state.saturationValue, descriptionText: "Color has changed", displayed: false)
}
def on() {
zigbee.on()
}
def off() {
zigbee.off()
}
/**
* PING is used by Device-Watch in attempt to reach the Device
* */
def ping() {
return zigbee.onOffRefresh()
}
def refresh() {
zigbee.onOffRefresh() +
zigbee.levelRefresh() +
zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) +
zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
zigbee.onOffConfig(0, 300) +
zigbee.levelConfig()
}
def configure() {
log.debug "Configuring Reporting and Bindings."
// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
// enrolls with default periodic reporting until newer 5 min interval is confirmed
sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
refresh()
}
def setColorTemperature(value) {
value = value as Integer
def tempInMired = Math.round(1000000 / value)
def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
zigbee.command(COLOR_CONTROL_CLUSTER, 0x0A, "$finalHex 0000") +
zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
}
//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
def setGenericName(value){
if (value != null) {
def genericName = "White"
if (value < 3300) {
genericName = "Soft White"
} else if (value < 4150) {
genericName = "Moonlight"
} else if (value <= 5000) {
genericName = "Cool White"
} else if (value >= 5000) {
genericName = "Daylight"
}
sendEvent(name: "colorName", value: genericName)
}
}
def setLevel(value) {
zigbee.setLevel(value)
}
private getScaledHue(value) {
zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
}
private getScaledSaturation(value) {
zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
}
def setColor(value){
log.trace "setColor($value)"
zigbee.on() +
zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
}
def setHue(value) {
zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
}
def setSaturation(value) {
zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
}
def installed() {
if (((device.getDataValue("manufacturer") == "MRVL") && (device.getDataValue("model") == "MZ100")) || (device.getDataValue("manufacturer") == "OSRAM SYLVANIA") || (device.getDataValue("manufacturer") == "OSRAM")) {
if ((device.currentState("level")?.value == null) || (device.currentState("level")?.value == 0)) {
sendEvent(name: "level", value: 100)
}
}
}
2 Likes
It updates immediately? If so that's great! Now for you to fix the iris keypad issue 
Actually I installed a keypad just because of your complaints, I got no problems, could you post a picture of the keypad? I will post a picture in a sec.
3 Likes
So after arming or disarming it stays lit like this instead of the lights going out. I'd have to wave my hand over it to trigger the motion sensor then it will go out but when arming to leave the house no one is inside to do that so it stays on and kills the batteries 
You returned HE, so there is no case to try to troubleshoot. Mine is working, did you added it to HSM and to Lock Code Manager?
1 Like
Yes, it does.
None of my three are exhibiting that. However I also do not use them often. When you paired the keypad, did it emit the usual Iris triple beep? If not, I would suggest that it didn't take the configuration.
If you go to the device page and click Configure it will resend the device configuration and the keypad should emit the triple beep to confirm.
I would suggest trying that as a next step in your troubleshooting.
1 Like
I don't have the issue with this model but with the xfinity model, yes, the light will stay on until you wave your hand.
It paired and worked properly except for the issue I described.
I would still click the configure button to push the correct config. They can still work even if they didn't get all of the configuration sent.
I did. Even removed and added it back. But when I saw older posts which the same complaints and no solution I figured it's not something that has been fixed.
Looking at it, it would seem that the time to turn illumination after motion may be too short because what happens is when arming it, the lights go out for the keys but the actual arming/disarming indicator stays on until the arming/disarming process is complete. There doesn't seem to be a way to turn the lights off other than the time out after motion.
After pairing the keypad. Press configure, wait a couple of minutes. Remove both batteries for a couple of minutes and insert batteries. Not sure why but that's how I get the lights to function normal on my Xfinity keypads. Possible it's the same as the Iris.
So I tried your ported Zigbee Dimmer Driver On one of my Sengled Element Color Plus bulbs. As you mentioned, it works exactly as @toyanucci described and showed in his video.
I believe it has something to do with the device configuration parameters that the ST code sends to these bulbs.
Since Hubitat does not automatically run the Configure command when changing a driver, I restored the driver to the Generic Zigbee RGBW Light driver. And what do you know...the physical on and off reporting still works!
@mike.maxwell - can you please add a feature request to implement the same Zigbee configuration settings that ST uses with these bulbs to the stock Hubitat Drivers for Sengled Element Classic and Sengled Element Color Plus bulbs?
The magic must be in these few lines of code, right?
def configure() {
log.debug "Configuring Reporting and Bindings."
// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
// enrolls with default periodic reporting until newer 5 min interval is confirmed
sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
refresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
}
Most likely it is the “zigbee.onOffConfig(0, 300)” command, I think...
3 Likes
I noticed that too but I had a mess with the settings so I ended clicking configure with the generic driver. Anyway we got a great feature discovered, too bad the guy returned the hub.
I never knew that !! Nice find Dan.
Regarding the OP: While it would be nice to have the Sengled status issue sorted out, I am struggling with the notion that it has to be either or with the ST and HE hubs. Sure, it's ideal to get everything working locally on the HE hub, but if something isn't quite right on HE, keep what's not right on ST.
I just setup my HE today and have migrated all but a few things over, but what I have not migrated continues to work just fine! And what I have transferred over is simply working faster and more reliably already. No way I'm ditching the HE if something hangs up getting completely off of ST. That is just silly.
Dry the baby off. The bathwater can be disposed of separately.
1 Like
@kipa the OP didn’t buy a SmartThings. He bought a Hubitat and then returned it in order to buy the ST. I don’t believe he ever had both at once
