Hello: I just migrated from a C5 and C8 and the good news is that things work (mostly). The one little glitch that I'm running into is with the UltrPro switches. I have 3 4 UltraPro switches ( UltraPro Z-Wave Smart Light Dimmer) that are not responding to on/off commands from the device page. The…

Additionally, I've had issues with some of the GE firmware updates and actually downgraded some of my devices because features didn't work... Like @danabw said, its probably in the drivers. You may need to switch to "device" and remove states... Then install the new driver and hit configure.

I have these and use the GE Enbrighten Z-wave Smart Dimmer driver. If you tried switching to that, did you also hit Save, then Configure, then Save again? There is also a firmware update; maybe the C8 needs that. Mine are on a C7

Yep - changed the driver , did the “save”, “configure”, “save” dance but no love. I also realized that I had purchased two dimmers and two switches. Tried both drivers but no luck. Do you know how I can tell them apart (physical appearance, user activated behavior)? [image] calinatl: There is a…

[image] rakeshg: I’ve never updated mine. How do I get the firmware? [image] GE Enbrighten/Jasco/Honeywell/Ultrapro Dimmer Flicker Devices Sorry to need so much handholding, but here goes: Which file on the linked github do I download? The one ending in ...5.53.o…

[image] calinatl: There is also a firmware update; maybe the C8 needs that. Mine are on a C7 @rakeshg I have a house full of GE/Jasco/Enbrighten/UltraPro switches and dimmers and they don't need anything special to work on a C8 (I've had them on a C8 and C8-Pro). The Generic Z-Wave Plus Dimm…

Try Jason's drivers... There are two versions... One that was pre-embrighten and the other that covers the newer features of embrighten. Are your UtraPro dimmers newer? Here are the links to his drivers. [image] [RELEASE] GE/Jasco Z-Wave Plus Dimmer Driver ⚙️ Custom Apps and Driv…

[image] SuperDupe: its probably in the drivers Absolutely, unless something really unusual is going on - I have never updated any drivers and have GE switches going back to 2016-17 on my hubs (C7, C8, C8-Pro) w/zero issues. Always work. If the shut down/restart doesn't help, @rakeshg , we'll …

@danabw @SuperDupe - Thanks for all the suggestions. I changed the driver to "Device", wiped out the states and went back to the built in GE Enbrighten Z-Wave Smart Switch and the switch is working again. What is really strange is that in the migration, the driver somehow got changed. Has anyone h…

I doubt the driver was changed during the migration, that is saved in the hub database and all it does is make a copy of it, nothing would be modified. Hub was probably just having a hard time reaching the devices since the migration wipes out the routing info. By fiddling with it for a while they …

[image] jtp10181: I doubt the driver was changed during the migration, that is saved in the hub database and all it does is make a copy of it, nothing would be modified. The driver was switched (see the screenshot in the first post). [image] jtp10181: Hub was probably just having a hard …

[image] rakeshg: The other strange thing was that the devices WERE reporting state change (on/off) and that was being updated in Apple Home Yes, the route from the device to hub is independent of hub to device route. So device could reach hub, but hub was having a hard time reaching the devic…

UltraPro switches don't work after migration - everything else seems to work

Get Help Devices

calinatl June 21, 2024, 2:23am 4