Turn ZEN75 switch on and off rapidly 1, 2 or 3 times to dim HexGlow lights
I have 3 new HexGlow lights sets for my workshop that are dimmable, but not via a dimmer, but by an on/off/on scheme using the switch they are attached to. The documentation states: Cycle through 100% 60% and 30% brightness by toggling switch on/off/on within 3 seconds. I've confirmed with the manufacturer that the on/off/on cycle be about 1 second for each step,
I have Zooz ZEN75 800LR switches to control each set of lights.
I need help to design an automation to step through the on/off/on sequence once. Then another automation to do that sequence twice (to achieve 60%) and a third automation to run through the sequence 3 times (to get 30% dimming).
I would be grateful for any direction or maybe point me to another post with some clues.
Much appreciated.
KC
(using a C-8 Pro with current version - 2.4.3.173)
