I have just bought a C-8. The migration went well. Rebuilt my C-7 for deployment on a restrictive network. Meaning, no DHCP, minimal ingress/egress, etc ,etc I managed to work around the temporary DHCP need to initially change to a different network segment, Boy, that was fairly dumb. Why are you…

I understand your frustration, but it DHCP does work fine for probably 99% of the situations.

Yeah, and this network design doesn’t include DHCP. The thing supports STATIC Ip, I press the button, it doesn’t work. How this is still and actual bug after skimming years of threads, is beyond any rational logic

[image] jason13: I press the button, it doesn’t work. I think that button changes it back to DHCP?

[image] jason13: How this is still and actual bug after skimming years of threads, is beyond any rational logic I can understand this is frustrating for you and other users with complex IP networks, but given that the vast majority of home networks (and thus Hubitat users) use DHCP, it’s not …

[image] BorrisTheCat: I think that button changes it back to DHCP? I’m guessing the OP is referring to the button to enable static IP addressing in the hub UI’s network settings page, not the hardware button on the underside of the hub.

From your post it is hard to tell what your actual issue is. The only bug I know about is if using a net mask other then /24 it incorrectly assumes the IP range and won’t let you set it to certain IPs. It sounds like that is maybe the only real issue preventing you from doing what you want? There i…

[image] jtp10181: Maybe someone can dig that up for you. [image] Static IP Address and DHCP Support for non /24 Subnets thought_balloonFeature Requests Try this endpoint: http://192.168.11.253/hub/allowSubnets?192.168.10.0 I think that should fix the i…

That's for something else, but this is the one for this: [image] Static IP Address and DHCP Support for non /24 Subnets thought_balloonFeature Requests There's a direct endpoint without /24 limitation for those who know what they are doing. The endpoint is /h…

I searched. That link doesn’t allow you to change from a static IP ranges of say 10.0.1.x. to 10.0.20.x. The “webui precautions” are even pulled into the direct URL. so, no go there. Even if you put up a dhcp server to get it on the vlan you need, then change to a static address with in that vlan,…

I was referring to the static ip webui button.

Hubitat

Static IP isn't very static

Get Help

BorrisTheCat June 27, 2026, 2:16pm 8

jtp10181:

Maybe someone can dig that up for you.

Static IP Address and DHCP Support for non /24 Subnets

Feature Requests

Try this endpoint: http://192.168.11.253/hub/allowSubnets?192.168.10.0 I think that should fix the issue. Also tagging @gopher.ny ...

think thats it

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled