Sonoff Mini

💬 Lounge
13

Are you sure you are using this firmware?

http://thehackbox.org/tasmota/release/sonoff-basic.bin

14

yep, just downloaded from the link you provided and it just sits there with no progress activity. Looks like the blue led changes fro 2 fast flashes to 3 fast flashes.

Gonna check the firewall etc.

1 Like
15

You should try this out. I read on the forums that it works pretty well. paspo/sonoff-flasher: an AlpineLinux image targeted at raspberry pi zero W for sonoff-diy autoflashing with Tasmota - sonoff-flasher - paspo's git

16

Ha, that was it. Windows firewall was up !
image

now onto other things :slight_smile:

1 Like
17

Good stuff. btw, what you planning to use with the Mini on? I have 4 here that are all flashed but I haven't found a use for them just yet. Pretty cool devices though :smile:

18

I'm going to try it out switching the main light in my guest bedroom.
I've only got switch wires down to the architrave switch (I hate those things) so I'm going to change it out for a momentary press switch, connected into the mini.
Also pair up an Iris motion in the room so during the day and in the evenings the motion will activate the mini (if lighting is required) only switching over to JUST the press switch after 9pm or so.

1 Like
19

Your right these things are quick.
This guy is faster than my HS-110

1 Like
20

Yeah mate they are lightning fast!! my mate (who isn't into home automation as much as me) just uses the Kmart Mirabella Genio gear and complains about it being so slow, I showed him how quick my Sonoff Basic R3's are and he was like WTF :stuck_out_tongue: . I even have them going over Zigbee to Wifi via button and no lag whatsoever.

21

This driver https://community.hubitat.com/t/release-sonoff-tasmota-switch-driver/4115functions is working but it is throwing a couple of errors which will need to be resolved.

Not sure if it is sufficient to simply comment out these lines but...
image

the errors certainly are no longer displayed.

22

Darn it.
I can't seem to configure the Mini's S1 and S2 terminals to latch the relay state.
They work great as a toggling function with a standard switch attached but I wanted to replace the mechs with push buttons.
Push (and release) to turn on
Push (and release) to turn off

23

Unfortunately I haven't played with the Sonoff Minis other than flashing them so I can't comment much further. That said jump on the Drrsz Facebook group as I'm certain someone there can comment. If you do find a fix report back.

Failing that I know for certain the Shelly 1 will do what you need albeit more expensive.

24

Yeah searching now. Should be doable, I'd just like to get the shorting of S1 and S2, acting as the Toggle.
It can be done via the Tasmota GUI so it should be able to be done.
A good job for a rainy day. Pity we've not had rain for months !

1 Like
25

Ah right so it's just a matter of configuring the module properly then. You'll definitely get someone on the forum with that information and they should be able to paste you th config.

26

Got it.
This does just what I want.

image
image.png419×566 11.5 KB

I'm liking these little guys.

1 Like
27

Nice one well done mate. Yes these guys are awesome. Shame alot of people on here from Aus wont try them as they fear the non Aus/NZ cert but for me who cares as there is far more ppl in China and US running them than our tiny countries so that's good enough for me :crazy_face::metal:

1 Like
28

To get my Sonoff Mini and S1&S2 to work, I pasted the following string into configuration/ configure other \template
{"NAME":"Sonoff Mini","GPIO":[17,0,0,0,9,0,0,0,21,56,0,0,255],"FLAG":0,"BASE":1}

Then activate template.

1 Like
29

Hello all... sorry old thread

I managed to tasmotize 2 sonoff basic through the serial port and the tasmotize.exe software.

I have purchased now the sonoff mini and I was wondering if

1.) I can use the same method I used for the Sonoff basic with serial and the tasmotizer
2.) if not, if you can point me in to the right direction of a working method to tasmotize my Sonoff Mini devices

Many Thanks in advance

Here I link of what I did with my sonoff devices in case you are interested

30

I answer myself to my previous post
Followed this video .... no issues at all

31

I just paired this one with my Hubitat without any additional driver. It just worked.

Hubitat Elevation Platform 2.2.6.140
Hardware version Rev C-7

Relay model: Sonoff 01MINIZB
Driver: Generic Zigbee Switch

32

@szmydadam - OP is talking about the WiFi Sonoff Minis... not the Zigbee ones. But, thanks for pointing out that a Zigbee version exists, I didn't know :slight_smile: