Should this much logging be a concern

📢 Feedback
1

I’m seeing this over and over from 10 to 30 seconds and its non stop from this one device. Should there be any concern other than the battery going dead faster at some point?

2018-03-21 13:30:36.047:infoContact Laundry Door battery is 100%

dev:12018-03-21 13:30:13.846:infoContact Laundry Door battery is 100%

dev:12018-03-21 13:29:53.895:infoContact Laundry Door battery is 100%

dev:12018-03-21 13:29:34.002:infoContact Laundry Door battery is 100%

dev:12018-03-21 13:29:13.806:infoContact Laundry Door battery is 100%

dev:12018-03-21 13:28:53.843:infoContact Laundry Door battery is 100%

dev:12018-03-21 13:28:33.763:infoContact Laundry Door battery is 100%

dev:12018-03-21 13:28:14.011:infoContact Laundry Door battery is 100%

dev:12018-03-21 13:27:53.766:infoContact Laundry Door battery is 100%

dev:12018-03-21 13:27:33.975:infoContact Laundry Door battery is 100%

dev:12018-03-21 13:27:13.742:infoContact Laundry Door battery is 100%

dev:12018-03-21 13:26:53.691:infoContact Laundry Door battery is 100%

2

Is that a Monoprice Z-Wave Plus door sensor, by any chance? There’s this thread on ST forum with a similar scenario; not sure how it resolved:

https://community.smartthings.com/t/excessive-battery-usage-monoprice-z-wave-plus-door-window-sensor-24259/120275/7:

3

@Tony nope its a SmartThings multi sensor v4

4

It’s going to drain your battery. If it was mine I’d reset the sensor (no need to remove it from Hubitat); put Hubitat into ‘add devices’ and let it re-join. Maybe some parameter didn’t get received properly the first time it paired.

5

You can hit configure in the driver details, it does the same thing.

1 Like