Shelly BLU H&T data

[subscribernet1]

---

Hub C7 on 2.4.3.137

I'm really stuck trying to get some humidity data from the Shelly BLU H&T. I have added a Gen3 switch as gateway, linked the H&T to it, can see both on the Shelly app and can control the switch from HE dashboard. I have installed all the drivers, apps etc. that I can find.

What I need is a step by step procedure in laymans terms as to how I get the data from the H&T device to show up in HE so that I can use it in apps and rules etc. to control devices.

Please help.

[chrisbvt]

Are you using a cloud driver in Hubitat to control it?

Like this one?

[RELEASE] Shelly Device Drivers (NO MQTT NEEDED)

Hey everyone! I've been working on some device drivers for Shelly devices that do not require running a server with an MQTT broker to function. They also do not rely on any sort of polling for state changes, everything is instant response. The notable deviation from this is the Uni Gen 1, which has (optional) polling child devices for the ADC, DS18B20, and DHT22. You can find the drivers on HPM, just search for "shelly": [image] Or install them manually from the GitHub repo if you prefer. T…

[RELEASE] Shelly Device Drivers (NO MQTT NEEDED)

Hi @daniel.winks I have just tried this on my new Shelly H&T Gen3, and so far it's behaving nicely. This is so much easier than faffing about with a separate MQTT server, thank you very much!

If that is the driver you are using, I would post your question to that forum. If not, I would try that driver.

[subscribernet1]

I've added all those drivers to my HE. The shelly switch I'm using as a gateway for the BLU H&T is working fine through HE, but there is no temperature or humidity data showing.

I'm obviously missing something in the creation of the H&T or Gateway device in HE as all the data is showing up on the Shelly app, in both the H&T and the switch.