Just mentioned the Yolink Garage Door kit in another thread. You could try it with their hub, but the range of the Yolink hub is not as far as a Yolink Device to Device connection for some reason. I truely do get around 1/4 of a mile range with a D2D connection, and that's also with the sensor inside a nested metal box. Really incredible performance.
Yolink does offer a Temp/Humidity sensor too, and yes there is a Hubitat community integration for it, but there are two things you need to consider.
- The range of the hub isn't as good, and a D2D connection is for binary devices only so that work around wouldn't apply for a T/H sensor. You would have to experiment to find out if the Yolink T/H sensor to Yolink hub connection is not too far away for your situation.
- Until the Yolink local hub finally hits the market, there's a dependency on the cloud to use any of their currently available hubs.
So for the garage sensor, I would absolutley recommend the Yolink Garage Door Kit, with a Z-Wave or Zigbee sensor physically attached to the relay to get an event in Hubitat. The Ecolink flood sensor should work fine for that, and it already has wires coming out of it. Just cut the probe off and connect the wires to the sensor terminals on the Yolink garage door kit relay.
For the Yolink Temp/Humidity sensor, I would only recommend trying it if you're OK with a cloud connecton for that one sensor in your smart home, and I'd also recommend buying that from Amazon, so if it doesn't work out you have an easy return path.
The light notification is easily accomplished with a compatible color smart bulb. The phone notification part is easily accomplished with the Hubitat Notifier app on the hub and the Hubitat mobile app on your phone.
