I could use some help. I have a ZooZ Multirelay Zen 16, I'm trying to read the "Last Activity At" (date/time) ex (1/11/2025, 4:25:45 PM) in RM, and then take that value transfer it another hub variable example "ZooZ_R3_Date_Time". I'm struggling and need some help thanks in advance [image]

If you can stand to have the alerts for when there is no activity within the last full minute you can use DAC: [RELEASE] Device Activity Check - Get notifications for "inactive" devices You would setup a group with 1 minute [image] Pick your notification "device" (where to send notifications) T…

I don't think you can. Apps can have access to this however, I believe. For example: [image] [RELEASE] Device Activity Check - Get notifications for "inactive" devices Custom Apps (Putting this at the top to make it easier to find...explanation of the app is below.) Thi…

Can Device Activity Check provide near real time notification direct to iPhone? ,I do understand it can send an report based on a schedule time. I would like to know when it stop communicating and not have to wait for scheduled report.

No. This does not generate an event, so it's not something apps can subscribe to. You can automate report to be generated however you want (including a virtual switch or button, not just the in-app schedule). But I wouldn't recommend going too extreme...is there a specific concern? A powered Z-Wav…

You cannot really use that to get a real time alert. How would you know when the last activity is stale? Unless You issue a refresh every minute, which would not be advised. What do you need this for anyway?

My plan is to create my own watch dog timer, I was going to monitor the last activity time, I have a rule that forces the ZooZ to reply every 15 seconds. Im watching the time in the ZooZ device, and it updates every 15 sec, I just cannot access the time on the ZooZ, It appears not to be exposed for …

We use hurricane watchdog timers in the SCADA business for offshore wells. We set a period of time,for hurricanes, we use 4 hours, if the PLC does not reply after 4 hours, the PLC will shutin the wells. Its MMS relations. In my case, its just a simple alarm for our office, we just want to know when…

How about a rule to ping it periodically? You can do that in RM.

can you provide an example, im not sure how to ping a zwave device

I said this the other day. Bear in mind, I'm no genius. Also, the ZEN16 can do auto on/off. You could set it up so that an unused relay, or just a signal I think in the ones, goes on and off periodically, and test for duration. Probably wouldn't want to do the relay, but I think the new 16's can…

RM help needed - ZooZ MultiRelay Zen16 "Last Activity At"

Rule Machine®

velvetfoot January 11, 2025, 11:18pm 2

I don't think you can.

Apps can have access to this however, I believe.

For example: