Thank you for the debounce option. I am testing this now
So it looks like the debounce works when its triggered but when the cog becomes false the humity is less 70 it shuts of the fan. But if it drops again it re runs the off function. Can we get a debouce for the reverse 
1 Like
New version on GitHub...
3.4.7 - 02/02/22 - Adjustment to The Flasher, Upgrade to Switches In Sequence, App Debounce now works with reverse
2 Likes
New version on GitHub...
3.4.8 - 02/08/22 - Added option to include/exclude No Code Unlocks
Hi Bryan, have you received your Lifx strips ? 
Yup, Pattern Controller. 
I just went back and looked at your screenshots. I can only support the built-in driver at this point. Also, the error in your log looks like it's for a HS WD200 Dimmer device, using a driver from a developer that's no longer part of this community. 
You've been busy ! I installed Pattern Controller yesterday and it seems great for controlling the LED zones, good job., will make controlling the LIFX in the kids room way easier.
But I fail to see how this will fix the problem with EE controlling Lifx correctly. I updated EE but same problem is present.
The Homeseer dimmers error using CodaHQ's driver is a known issue. Unfortunately, no one (that I know of) has a complete driver for these dimmers. The Hubitat built-in driver is very basic and does not support controlling the 7 LED's. I use a lot of the annunciation features of these dimmers using the 7 colored LEDS for tasks like:
Washer, Drier, Oven, Microwave Status
Load shedding, Plant watering levels, Pool Backwash needed, Aquarium cleaning needed, Front and backdoor status, Alarm system status, Garbage and Recycling days notifications.
I do see the errors generated in the log but it does not affect the way EE controls the lights, they work fine.
Can you show me a screenshot of the errors between EE and the Lifx Strip?
I don't get an error message from what I'm seeing in the log, but when the MODE changes, the light turns on to the previous mode color (as set in EE) and then instantly changes to the proper color for the present mode. Exemple: Night mode: all LEDs are RED, Morning mode, the LEDs are supposed to be 2700K. So the light turns on RED, followed by 2700K, all at once and (it seems anyway) full power, as I'm getting a flash of light. Cool effect.... but wife is not impressed.. she's the one to gets up at night. It does the same Effect when EE turns off the LifX LED after the delay. (I remember this happening with my regular dimmers but it's been a year or more that this has not happened).
I think the LED going full power as something to do with the way EE works. I use "Dim lights after delay as warning" alot and EE is probably ramping up the lights to the programmed value and turning it off instantly to "remember the setting"
This is what I am getting from the logs:
dev:52862022-02-16 12:22:14.371 infoMarches - Zone 8 level is 12%
dev:52862022-02-16 12:22:14.368 infoMarches - Zone 8 switch is on
dev:52862022-02-16 12:22:14.366 infoMarches - Zone 8 colorName is Soft White
dev:52862022-02-16 12:22:14.363 infoMarches - Zone 8 colorMode is CT
dev:52862022-02-16 12:22:14.359 infoMarches - Zone 8 colorTemperature is 3200°K
dev:52862022-02-16 12:22:14.356 infoMarches - Zone 8 saturation is 0
dev:52862022-02-16 12:22:14.353 infoMarches - Zone 8 hue is 100
dev:52852022-02-16 12:22:14.344 infoMarches - Zone 7 level is 12%
dev:52852022-02-16 12:22:14.341 infoMarches - Zone 7 switch is on
dev:52852022-02-16 12:22:14.337 infoMarches - Zone 7 colorName is Soft White
dev:52852022-02-16 12:22:14.334 infoMarches - Zone 7 colorMode is CT
dev:52852022-02-16 12:22:14.331 infoMarches - Zone 7 colorTemperature is 3200°K
dev:52852022-02-16 12:22:14.328 infoMarches - Zone 7 saturation is 0
dev:52852022-02-16 12:22:14.325 infoMarches - Zone 7 hue is 100
dev:52842022-02-16 12:22:14.317 infoMarches - Zone 6 level is 12%
dev:52842022-02-16 12:22:14.314 infoMarches - Zone 6 switch is on
dev:52842022-02-16 12:22:14.309 infoMarches - Zone 6 colorName is Soft White
dev:52842022-02-16 12:22:14.306 infoMarches - Zone 6 colorMode is CT
dev:52842022-02-16 12:22:14.304 infoMarches - Zone 6 colorTemperature is 3200°K
dev:52842022-02-16 12:22:14.301 infoMarches - Zone 6 saturation is 0
dev:52842022-02-16 12:22:14.297 infoMarches - Zone 6 hue is 100
dev:52802022-02-16 12:22:14.287 infoMarches - Zone 5 level is 12%
dev:52802022-02-16 12:22:14.284 infoMarches - Zone 5 switch is on
dev:52802022-02-16 12:22:14.281 infoMarches - Zone 5 colorName is Soft White
dev:52802022-02-16 12:22:14.279 infoMarches - Zone 5 colorMode is CT
dev:52802022-02-16 12:22:14.276 infoMarches - Zone 5 colorTemperature is 3200°K
dev:52802022-02-16 12:22:14.274 infoMarches - Zone 5 saturation is 0
dev:52802022-02-16 12:22:14.271 infoMarches - Zone 5 hue is 100
dev:52792022-02-16 12:22:14.265 infoMarches - Zone 4 level is 12%
dev:52792022-02-16 12:22:14.262 infoMarches - Zone 4 switch is on
dev:52792022-02-16 12:22:14.259 infoMarches - Zone 4 colorName is Soft White
dev:52792022-02-16 12:22:14.256 infoMarches - Zone 4 colorMode is CT
dev:52792022-02-16 12:22:14.254 infoMarches - Zone 4 colorTemperature is 3200°K
dev:52792022-02-16 12:22:14.251 infoMarches - Zone 4 saturation is 0
dev:52792022-02-16 12:22:14.248 infoMarches - Zone 4 hue is 100
dev:52782022-02-16 12:22:14.237 infoMarches - Zone 3 level is 12%
dev:52782022-02-16 12:22:14.235 infoMarches - Zone 3 switch is on
dev:52782022-02-16 12:22:14.232 infoMarches - Zone 3 colorName is Soft White
dev:52782022-02-16 12:22:14.229 infoMarches - Zone 3 colorMode is CT
dev:52782022-02-16 12:22:14.226 infoMarches - Zone 3 colorTemperature is 3200°K
dev:52782022-02-16 12:22:14.223 infoMarches - Zone 3 saturation is 0
dev:52782022-02-16 12:22:14.221 infoMarches - Zone 3 hue is 100
dev:52772022-02-16 12:22:14.214 infoMarches - Zone 2 level is 12%
dev:52772022-02-16 12:22:14.212 infoMarches - Zone 2 switch is on
dev:52772022-02-16 12:22:14.209 infoMarches - Zone 2 colorName is Soft White
dev:52772022-02-16 12:22:14.207 infoMarches - Zone 2 colorMode is CT
dev:52772022-02-16 12:22:14.204 infoMarches - Zone 2 colorTemperature is 3200°K
dev:52772022-02-16 12:22:14.200 infoMarches - Zone 2 saturation is 0
dev:52772022-02-16 12:22:14.198 infoMarches - Zone 2 hue is 100
dev:52762022-02-16 12:22:14.195 infoMarches - Zone 1 level is 12%
dev:52762022-02-16 12:22:14.192 infoMarches - Zone 1 switch is on
dev:52762022-02-16 12:22:14.190 infoMarches - Zone 1 colorName is Soft White
dev:52762022-02-16 12:22:14.187 infoMarches - Zone 1 colorMode is CT
dev:52762022-02-16 12:22:14.184 infoMarches - Zone 1 colorTemperature is 3200°K
dev:52762022-02-16 12:22:14.181 infoMarches - Zone 1 saturation is 0
dev:52762022-02-16 12:22:14.176 infoMarches - Zone 1 hue is 100
dev:52452022-02-16 12:22:13.877 infoMarches color is #1F1F1F
dev:52452022-02-16 12:22:13.873 infoMarches level is 12%
dev:52452022-02-16 12:22:12.155 infoMarches switch is on
dev:52452022-02-16 12:22:11.862 infoMarches color is #262626
dev:52452022-02-16 12:22:11.854 infoMarches level is 15%
dev:58662022-02-16 12:22:11.399 infoMS Marche is active
I don't know if it's normal to see 2 changes in level within 2 seconds. Right now I'm in DAY mode and programmed Level is 35%. The log indicates 15% and then 12% ??
New version on GitHub...
3.5.0 - 02/17/22 - Changes to reverse, hopefully no more flash before turning off
1 Like
Awww. I'll miss little flashy...
1 Like
I can confirm, no more flashy ! it works as it should, Thank-you !
There is a problem with using Color Temperature with Lifx. I don't know why but everything works fine using colors (even "soft white", "day light", etc) but if I dial 2700K, 3000K, etc. The light does not follow the light Level. e.g. asking for 100% gives me 12% sometimes, I still need to do some testing, the problem seems intermittent.
Check this out...
Based on this thread, I've created an UI enhancement for Event Engine! You can find the code on my GitHub. All thanks goes to @tomas1 for his original script.
Note: this script doesn't contain any of the other great features of the original script. It only adds EE to the menu and creates the nice 'by room' page. Consider this an 'add-on' script to his multi-feature script. But it can also work without it.
2 Likes
If I could give 10 "Likes" I would... 
1 Like
Could someone take a look at this cog and tell me if you see something I am missing? It fires off like it should on weekend mornings at 0500, but for some reason it isn't shutting off at 0600 (impacting WAF). I cant seem to figure out why. I forgot to set up to run logs this weekend, but was hoping maybe Simeone sees something I'm just missing. Thanks!
Remove the 'Restriction' on 'Between two times'. It's keeping anything from happening when the conditions become false.
1 Like
When a cog fires, does EE do a refresh before capturing device states? Or does it just capture whatever is currently reported in HE?
I have a bunch of kasa wifi switches that don't actively report their state to HE. Their state in HE is only accurate as of the most recent poll unless a refresh command is sent.
Hoping someone can help me. I have blue iris. I am wanting to do the following. Set up a virtual switch so that when it is on, I receive no alerts from my outside cameras. When it is off, I receive alerts from blue iris. So, I made a profile in Blue iris that essentially stops alerting me to activities. I named this profile 7. I can get event engine to change the blue iris profile to profile 7. How can I get event profiler to make blue iris go to the previous profile (prior to the change to profile 7)? If I go into blue iris, I can press the 'pause' symbol next to the shield and blue irsis will go back to the current active schedule. How do I send this type of command to go back to the current active schedule with event engine? Thanks. Brock
EE uses what is in HE. To refresh every device, every time would be waaaay too much traffic.
Sorry, I don't have any way of doing this. Best you can do is use the same command to set the profile to what ever you want at that time.
