Lutron Smart Bridge Pro and Somfy integration?

[dennypage]

WRT the Somfys, you can integrate them via RTS, or via a multi-relay controller connected to your existing wiring.

Here is a driver for an RTS bridge:

[RELEASE] Somfy Z-Wave to RTS Interface II driver

If anyone is interested, I have a driver for the Somfy Z-Wave to RTS Interface II that I've done. Comments welcome. Code can be found here: GitHub - dennypage/hubitat: Hubitat drivers and applications Thanks, Denny

Here is a driver for a multi-relay approach:

[RELEASE] Multi-Relay Door/Shade Controller

Multi-Relay Door/Shade Controller This application creates and manages a single child device that controls a door or window shade that uses descrete relay inputs (Open, Close, Stop) to manage the physical device. An example of this is automated door controllers from companies like Doors In Motion (Caldwell/INMOTION). There are three relays supported: Open: Start opening the door or shade. Close: Start closing the door or shade. Stop: Stop the door or shade at the current postion. The Open a…