Any chance to update the driver to support VRCS2 (that is 2 two-scene controller with two switches)? Seems like current drive works partially, adding device to HE works fine (one just need to add scene controller first by placing it to programming mode by holding both buttons 5+ seconds, only after that is successful can the two switches added one by one by holding each individual button 5+ seconds to set the switch to programming mode). But adding scene controller causes associations to be set incorrectly, this probably could be fixed if driver had option to specify how many switches/loads unit has (0, 1, 2) ?
Also seems like driver could easily be expanded to support Leviton Zone controllers (VRCZ4) that has two buttons (on/off) for each 4 zones (instead of just single push button that is found on scene controller versions). Current driver works somewhat with VRCZ4 but both on and off buttons seem to just toggle zone, which is rather confusing especially since the zone status LED gets out of sync almost immediately...
