(Iris) Orbit Irrigation Controllers

awraynor · April 24, 2019, 10:25pm

A Twitter user (@AndrewX192) that is much more adapt at coding than myself pointed to the driver for the Orbit Irrigation Controller that I had on Lowe's Iris.

The code is on Arcus now. Is it possible for someone much more adept at coding than me
to change it for use with Hubitat?

github.com

arcus-smart-home/arcusplatform/blob/d5691b01f40cac5e5d4de9e1c8f8b6410a16daf4/platform/arcus-containers/driver-services/src/main/resources/ZB_Orbit_HoseTap8.driver

/*
 * Copyright 2019 Arcus Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/**
 * Driver for the Orbit Hose Tap 8 Timer
 * 
 * FACTORY RESET:
 *  - Press the "Reset" button 5 times in rapid secession.

This file has been truncated. show original

Navat604 · April 24, 2019, 11:33pm

You can use the supported orbit hose timer driver. Unless this is something else. I have 3 and they all work this this driver.

awraynor · April 24, 2019, 11:50pm

I'm off tomorrow and will have to look at it. I have the 8-zone controller I believe, but
only use 4 of them.

Navat604 · April 25, 2019, 12:25am

Ok, sorry, this is just a single zone device.

awraynor · April 25, 2019, 12:42am

No problem. No support on Hubitat or ST for my controller. Eventually will replace it and just be done with it like I am doing with my garage door controllers.