Iris/Linear garage door controller and HSM not triggering intrusion [SOLVED]

🛎️ Get Help
1

I have 2 of the Iris garage door controllers and neither are triggering the Intrusion alert configured in HSM. I'm using the "Generic Z-Wave Garage Door opener" driver. Below is the HSM config. The controllers are labeled left and right garage door.

image
image.png559×622 19.2 KB

The other contact sensors I have work and do send the text message when opened while HSM is armed. The dashboard does update to show the garage door is open. The opening/closing commands work from Hubitat. The hub firmware is 1.1.1.111

Is this a limitation on the driver I'm using, or have I possibly missed something.

2

Is it possible you've exceeded the 10 daily SMS message limit?

3

Only have SMS set to send when HSM is armed. It's normally only 1 or 2 per day. I have had 6 messages today from some testing prior to posting.

Thank you for the info. I knew there was a limit, but for some reason thought it was higher.

4

Not sure what the actual issue was but i removed the 2 controllers from the HSM rule and re-added. HSM is now correctly sending the txt for intrusion.

1 Like