I have 2 InvisOutlets from Kickstarter. They seem well-built and have both MQTT and web socket (undocumented) API's. MQTT works well with Mosquitto. Has anyone started working on a driver? I'd prefer web socket to avoid an additional device for an MQTT broker on the network. The outlet has Temp, …

I've requested documentation. Have received no response so far.

Did you go read the directions ( Matter Advanced Bridge ‐ Installation · kkossev/Hubitat---Matter-Advanced-Bridge Wiki · GitHub ) on what to do after installing via HPM? Basically, you need to do the following after adding the device via Matter to Hubitat: Manually change the driver to 'Matter Adva…

Do we know that the device is exposed as a Matter Bridge and not just a single device (with all the appropriate clusters)?

I'm going to tag @kkossev as he can explain it better than I can. His driver has a "fun" side effect in that it works with both Matter bridges and single, Matter devices. Based on what I can find at the InvisOutlet website ( InvisOutlet Pro ) and the Matter Advance Bridge Device Type Supported ( Matter…

Hi, I read the documentation, but as stated, I do not see where the driver is exposed for a change. Based on the notes, I expected to see it on the Preferences page. What am I missing? Thanks, Dave

[image] user1203: What am I missing? The Device Driver Type is not listed under the device's Preferences tab. It can be found on the Device Info tab for the particular device.

Oh, I was looking for a Driver Type, and missing the Type field. Thanks, I now get 8 endpoints! This is a lot better than writing a new driver.

I had been look at these, curious if you got it all working and what you thought so far

I haven't installed the outlet yet. It's difficult to find a good location. The best location is probably on the kitchen counter, but it has built-in USB ports that I hate to give up.

ok i did this but using the advance matter bridge it still is not discovring the 3 rd child device for rgb light control.

InvisOutlet - advice on how to proceed with creating a driver

Custom Apps and Drivers Custom Drivers

albertjmulder July 17, 2026, 4:25am 31

@user1203 I have created MQTT drivers for connecting to them, live in HPM.