Immax NEO Smart Siren Zigbee 3.0 driver

teet.niin · June 15, 2024, 12:59pm

Trying to get my Zigbee alarm to work. Device is connected, Driver setup, but no functions work.

Immax NEO Smart Siren Zigbee 3.0 Immax NEO Smart Siren Zigbee 3.0 - IMMAX.cz

Using Krassimir Kossev driver: https://raw.githubusercontent.com/kkossev/Hubitat/development/Drivers/Tuya%20Smart%20Siren%20Zigbee/Tuya%20Smart%20Siren%20Zigbee.groovy

Most resent log info:
dev:952024-06-15 15:54:57.407warnValvesireen ATTENTION! manufacturer = _TYZB01_b6eaxdlh unsupported Tuya cluster ZCL command 0x00 response 0xC3 data = [00, C3] !!!
dev:952024-06-15 15:54:57.406debugValvesireen device has received Tuya cluster ZCL command 0x00 response 0xC3 data = [00, C3]
dev:952024-06-15 15:54:57.358debugValvesireen basic cluster report : descMap = [raw:5C0C0100001605004206545330323139, dni:5C0C, endpoint:01, cluster:0000, size:16, attrId:0005, encoding:42, command:01, value:TS0219, clusterInt:0, attrInt:5]
dev:952024-06-15 15:54:57.324debugValvesireen sendZigbeeCommands(cmd=[he cmd 0x5C0C 0x01 0xEF00 0x00 {3923050400010207020004000000B4150400010B0D01000101} {}, delay 200])
dev:952024-06-15 15:54:57.312debugValvesireen sendZigbeeCommands(cmd=[he raw 0x5C0C 1 0x01 0x0000 {10 00 00 05 00}, delay 50])
dev:952024-06-15 15:54:57.309debugValvesireen wakeUpTuya()
dev:952024-06-15 15:54:57.308debugValvesireen swithing alarm strobe (presetBeepAndChimeSettings = fast)
dev:952024-06-15 15:53:28.972debugValvesireen NOT PARSED : descMap = [raw:5C0C0105000A0200191000, dni:5C0C, endpoint:01, cluster:0500, size:0A, attrId:0002, encoding:19, command:0A, value:0010, clusterInt:1280, attrInt:2]
dev:952024-06-15 15:53:28.967debugValvesireen UNPROCESSED description = enroll request endpoint 0x01 : data 0x0225 descMap = [:]
dev:952024-06-15 15:53:28.815infoValvesireen battery is 100% (4.2 V)
dev:952024-06-15 15:53:28.813debugValvesireen batteryVoltage = 4.2 V
dev:952024-06-15 15:50:27.143debugValvesireen NOT PARSED : descMap = [raw:5C0C0105000A0200191000, dni:5C0C, endpoint:01, cluster:0500, size:0A, attrId:0002, encoding:19, command:0A, value:0010, clusterInt:1280, attrInt:2]
dev:952024-06-15 15:50:27.137debugValvesireen UNPROCESSED description = enroll request endpoint 0x01 : data 0x0225 descMap = [:]
dev:952024-06-15 15:50:26.982infoValvesireen battery is 100% (4.2 V)
dev:952024-06-15 15:50:26.980debugValvesireen batteryVoltage = 4.2 V

teet.niin · June 16, 2024, 10:03am

Fingerprint info:
dev:952024-06-16 13:00:38.646infofingerprint profileId:"0104", endpointId:"01", inClusters:"0000,0001,0003,0004,0005,0500,0502,EEFF", outClusters:"0003,0019", model:"TS0219", manufacturer:"_TYZB01_b6eaxdlh", controllerType: "ZGB"

dev:952024-06-16 13:00:38.575traceZCL version:03

dev:952024-06-16 13:00:38.573traceSoftware Build Id:unknown

dev:952024-06-16 13:00:38.571traceModel:TS0219

dev:952024-06-16 13:00:38.569traceManufacturer:_TYZB01_b6eaxdlh

dev:952024-06-16 13:00:38.504debuggetting info for unknown Zigbee device...

teet.niin · June 16, 2024, 10:08am

Little update. It seems to work with frient Smart Siren driver. Red light flashes, sound works. Volume seems to be rather low. Setting the volume does not make any difference.

teet.niin · June 21, 2024, 8:57am

Battery level stays 100%, no matter what is real state.

kkossev · June 21, 2024, 9:54am

For future reference :

github.com/Koenkk/zigbee-herdsman-converters

Device request Smart Siren Immax Neo 07504L

opened 11:03AM - 08 Feb 23 UTC

closed 01:08AM - 30 Mar 23 UTC

haade-administrator

stale

immax cz send me Uart table |DP ID | DP Name | Identifier | Data Transfer Typ…e | Data Type | Properties| |-- | -- | -- | -- | -- | --| |4 | alert | alert_state | Send and Report | Bool | |5 | Alarm Volume | alarm_volume | Send and Report | Enum | Enum Value: mute, low, middle, high| |6 | Power supply state | supply_state | Report Only | Bool | |13 | Alarm Switch | alarm_switch | Send and Report | Bool | |14 | Battery level | battery_percentage | Report Only | Value | Value Range: 0-500, Pitch: 1, Scale: 0, Unit: %| |17 | Brightness Adjustment | alarm_bright | Send and Report | Enum | Enum Value: dark, weak, middle, strong| |18 | alarm time | alarm_time2 | Send and Report | Value | Value Range: 0-180, Pitch: 1, Scale: 0, Unit:| my js: fingerprint: [ { modelID: 'TS0219', manufacturerName: '_TYZB01_b6eaxdlh', }, ], model: '07504L', vendor: 'Immax', description: 'Smart siren', fromZigbee: [fz.battery, fz.ts0216_siren, fz.power_source], toZigbee: [tz.warning, tz.ts0216_alarm, tz.ts0216_duration, tz.ts0216_volume], exposes: [ e.battery(), e.battery_voltage(), exposes.binary('alarm', ea.STATE_SET, true, false), exposes.numeric('volume', ea.ALL).withValueMin(0).withValueMax(50).withDescription('Volume of siren'), exposes.numeric('duration', ea.STATE_SET).withValueMin(0).withValueMax(240).withValueStep(5) .withUnit('s').withDescription('Alarm time'), ], meta: {disableDefaultResponse: true,}, configure: async (device, coordinatorEndpoint, logger) => { const endpoint = device.getEndpoint(1); const bindClusters = ['genPowerCfg', 'genBasic', 'ssIasZone', 'ssIasWd']; await endpoint.read('ssIasZone', ['zoneState', 'zoneStatus', 'iasCieAddr', 'zoneId']); await endpoint.read('ssIasWd', ['1', '2', '3', 'maxDuration']); await reporting.bind(endpoint, coordinatorEndpoint, bindClusters); await reporting.batteryVoltage(endpoint); await reporting.batteryPercentageRemaining(endpoint); if (device.powerSource == 'Mains (3 phase)') { device.powerSource = 'Mains (single phase)'; } else if (device.powerSource == 'Emergency mains and transfer switch') { device.powerSource = 'Battery'; } device.save(); }, ![immax](https://user-images.githubusercontent.com/76404800/220135085-3db3958a-2a06-46de-bf8a-0433c8fad7bf.png) and state: `{ "ac_status": false, "alarm": false, "battery": 90, "battery_low": false, "linkquality": 58, "power_source": "mains_three_phase", "restore_reports": false, "state": "OFF", "supervision_reports": true, "tamper": false, "test": false, "voltage": 4100, "volume": 111 }` db: ` {"id":42,"type":"Router","ieeeAddr":"0x847127fffea490bf","nwkAddr":12466,"manufId":0,"manufName":"_TYZB01_b6eaxdlh","powerSource":"Mains (3 phase)","modelId":"TS0219","epList":[1],"endpoints":{"1":{"profId":260,"epId":1,"devId":1027,"inClusterList":[0,1,3,4,5,1280,1282,61183],"outClusterList":[3,25],"clusters":{"genBasic":{"attributes":{"modelId":"TS0219","manufacturerName":"_TYZB01_b6eaxdlh","powerSource":2}},"ssIasZone":{"attributes":{"iasCieAddr":"0x00124b0008c98813","zoneState":1,"zoneStatus":16,"zoneId":23}},"genPowerCfg":{"attributes":{"batteryVoltage":42,"batteryPercentageRemaining":200}},"ssIasWd":{"attributes":{"1":50,"2":100,"3":0,"maxDuration":10}}},"binds":[{"cluster":1,"type":"endpoint","deviceIeeeAddress":"0x00124b0008c98813","endpointID":1},{"cluster":0,"type":"endpoint","deviceIeeeAddress":"0x00124b0008c98813","endpointID":1},{"cluster":1280,"type":"endpoint","deviceIeeeAddress":"0x00124b0008c98813","endpointID":1},{"cluster":1282,"type":"endpoint","deviceIeeeAddress":"0x00124b0008c98813","endpointID":1}],"configuredReportings":[{"cluster":1,"attrId":32,"minRepIntval":3600,"maxRepIntval":62000,"repChange":0},{"cluster":1,"attrId":33,"minRepIntval":3600,"maxRepIntval":62000,"repChange":0}],"meta":{}}},"appVersion":80,"stackVersion":2,"hwVersion":2,"dateCode":"20190430","zclVersion":3,"interviewCompleted":true,"meta":{"configured":1678613392},"lastSeen":1676900513514,"defaultSendRequestWhen":"immediate"} ` any help please _Originally posted by @haade-administrator in https://github.com/Koenkk/zigbee-herdsman-converters/issues/2470#issuecomment-1422192041_

system · June 21, 2025, 9:55am

This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.