HS WD-200 LED Light control

[kraig109]

Does anyone have the instructions to control the LED lights on the HS-WS200 switches? I used these in ST and had it working there. Here, I got the LEDs on once, but not secondary times.

I know you got to use the setStatusLED and three integer parameters. But as I recall in ST I HAD to execute setSwitchModeNormal which does not seem to be in the HE driver.

Anyone figure this out yet?

[Ryan780]

Covered on another thread.

Homeseer WD200 LED Color and Ramp rate

Sure no prob. The way I am using them is to let me know at night if any perimeter doors or windows are open. I have the wall dimmer just have the white led lights that indicate dimming level when all doors and windows are closed. If a door or window is open, the LED's blink Red. To set this up is two parts. first you need to create two custom commands, then create a rule. To setup the custom commands: Click on Apps Click on Rule Machine Click "Create Custom Commands" create a custom command …

[kraig109]

Thanks. I'll review! I did search, but not sure why this one did not come up. Anyway, thanks again!

[Ryan780]

Probably too narrow with your search. It was literally the 3rd one from the top when you search for Homeseer.