banta
February 18, 2019, 4:51pm
1
Any plan to support the Homeseer zwave switches with the RGB lights for status? I don't really care about the scene support with multiple clicks but the status lights would be very useful
https://shop.homeseer.com/collections/lighting/products/hswd200
Ryan780
February 18, 2019, 10:54pm
2
It is already built into the native driver.
Here's a link to how to use the commands.
There is a toggle to enable LED control via setStatusLED command. It takes 3 parameters. Color and blink default to off and solid if not supplied.
LEDs will be used to display dimmer level, unless LEDs are being used to display a status. They switch back and forth automatically.
setStatusLED(led, color=“0”, blink=“0”)
LED: 1-7
0 = All Off
8 = All with parameters.
Color: (word or number)
"off": "0",
"red": "1",
"green": "2",
"blue": "3",
"magenta": "4",
"yellow": "5",
"cyan": "6",
"…
banta
March 24, 2019, 9:19pm
3
Is this the same driver for the fan control they sale? It seems to work but wanted to make sure as I had to manually assign the driver.
system
September 22, 2022, 6:50pm
4
This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.
