[GUIDE] REST980 in Synology docker for iRobot Scheduler ( Roomba server)

🚧 Developers
1

On Synology NAS. It works for all Rest980 server not just for:

Synology_Docker_roomba_Rest980 (1)
Synology_Docker_roomba_Rest980 (1)1309×778 193 KB
Synology_Docker_roomba_Rest980 (2)
Synology_Docker_roomba_Rest980 (2)1311×784 181 KB
Synology_Docker_roomba_Rest980 (3)
Synology_Docker_roomba_Rest980 (3)1307×779 231 KB
Synology_Docker_roomba_Rest980 (4)
Synology_Docker_roomba_Rest980 (4)1308×779 202 KB
Synology_Docker_roomba_Rest980 (5)
Synology_Docker_roomba_Rest980 (5)1303×774 209 KB
Synology_Docker_roomba_Rest980 (6)
Synology_Docker_roomba_Rest980 (6)1300×783 239 KB
Synology_Docker_roomba_Rest980 (7)
Synology_Docker_roomba_Rest980 (7)1307×779 172 KB

2 Likes
2

Was banging my head trying to get this ruining on a Mac mini, until I found this. Had it running on the NAS in 10 muintes.

THANK YOU!!

Are you also running node red on the synology? I got it installed but when I go to NASIP:1880/ui I get "Cannot get ui" any suggestions appreciated. when in doubt reboot! It's running now. Sweet!!

3

https://community.hubitat.com/uploads/default/original/3X/0/6/06706ff1c8c0323d4ca1cf4c276c2c8322447cdd.jpeg

When you are in this setup.
Both fields have to be 1880.

4

Yeah I had that, but it would not work unit I rebooted the NAS. Oh well all is good now, both Roomba and Node-red are up and running now. Thanks for the pic write up. now to master node-red (seemingly a feat in itself)