Difficulty controlling Zooz Zen17 Relay child device

jtp10181 · November 12, 2025, 8:07pm

Check your refresh intervals for the dashboards

For zwave issues see this post:

Z-Wave Issues

For partial or total loss of Z-Wave control (radio seems dead), before doing anything else please shut down the hub from settings and unplug for 30 seconds, then re-plug to boot back up. This will allow the radios to fully power down and restart. A regular reboot only restarts the platform and not the radio hardware.

Official Hubitat Documentation Resources:
Hubitat Docs: Z-Wave Details
Hubitat Docs: How to Troubleshoot Z-Wave

What info to provide for troubleshooting assistance:

How is Hub being powered? Supplied power block or other (explain)

PoE power (with splitter) is known to cause major Z-Wave issues on the C-8 hub.

See this post for detailed write up on PoE testing: PoE and the C8

Provide screenshots showing entire Z-Wave details Page

Hub should be running for at least 12hrs without reboot, and state how long in your post (you can find uptime on Logs > Device Stats)

Click the Refresh Statistics button, wait 10 seconds, then Refresh the page

Provide screenshot of Z-Wave Topology Map (red/blue squares)