I see that hubitat has built in support for denon receivers. Not sure where to go to get it added. Not interested in any of the heos support either. Thanks

Have you tried doing this? [image] Denon AVR control? Devices Pretty simple, create a virtual device using the Denon Driver. Within the driver specify the IP Address of your receiver. Make sure you have your receiver setup to accept network control. Good to go.

Thanks, where does one get the Denon driver at?

[image] gurule31: Thanks, where does one get the Denon driver at? Create a new virtual device and choose Denon AVR in the type. [image] Once saved enter the IP of your AVR and then cycle through your inputs in the AVR to dynamically set the driver up. This can be done by simply spinning th…

"...then cycle through your inputs in the AVR to dynamically set the driver up" Could you please elaborate? When I spin the input knob there is nothing happening within the Hubitat app

Have you created a virtual device for your AVR? That has to be done first.

Yes, that is how I am able to control the volume, but that seems to be the only control available

[image] lochebiz: Could you please elaborate? When I spin the input knob there is nothing happening within the Hubitat app As you spin the input dial the state inputSources variable should be populated. Given it’s a state variable you must refresh your browser to see the value. Example: [im…

And then what? So I can give it a name. So what? My dashboard still does not have any interface that allows me to do anything but change the volume.

[image] lochebiz: So what? My dashboard still does not have any interface that allows me to do anything but change the volume. I was just answering your first question :wink:. Dashboards and UI control of “music player” capable devices in HE is a much broader topic than this Denon driver. Thi…

Denon AVR Support

Get Help

bertabcd1234 November 10, 2020, 9:33pm 2

Have you tried doing this?

Built-in Denon Receiver Driver - Zone 2 Support?