Open another tab with the HE logs running and go through the app setup again and see what errors you are getting.
--- Live Log Started, waiting for events ---
Please see my post above:
If I'm understanding you correctly your asking if i changed lines 350 & 363 to tchoward which i did.
I too get the error about the device type not found in teh namespace. I am trying to add two Liftmaster doors with no sensors. I have attached my log file below.
2019-01-03 09:29:15.228 pm debugUpdated...
Did you add the driver as well as the app?
Yes I've added both to the app code and driver code.
And you are going into the app and NOT creating the device manually?
This time around all I did was run the set up in the app and that's it, one of the previous posts above stated that would create the device automatically.
I am getting this error. I installed the app and the driver it logins into myq ok and goes throught the final step until this
homie opener: problem creating door device (no-sensor type). Check your IDE to make sure the brbeaird : MyQ Garage Door Opener-NoSensor device handler is installed and published. homie opener: problem creating push button device. Check your IDE to make sure the smartthings : Momentary Button Tile device handler is installed and published.
Your SmartApp version (3.0.0) is not the latest version (2.1.6)
Do you have those two drivers loaded? Obviously it is missing one or more of them.
it seems to be looking for a child device driver that it is unable to find.
@cwwilson08 I've confirmed that I have the app and driver loaded that have been mentioned here. I don't see a child DH available. Is there something I'm missing?
There are other drivers needed if you want to create the open and close buttons. You need to have the momentary button tile driver. Try creating without the open/close devices.
I ended up getting it working. I have to get the missing device handlers from the original source GitHub - brbeaird/SmartThings_MyQ: Integrate SmartThings with MyQ
Did you have to edit the device driver code at all? I installed all the drivers, but I'm still getting an error saying the driver for the door (NoSensor) isn't there.
I figured out the problem. I didn't change the namespace to "tchoward" in the device driver. It seems to be working now.
I should fix that ... I need to put in some cleanup time, just been too busy...
Unlike ST, I think I can get a All-in-one device handler working, but we’ll see
Curious what the latest is on this. Can someone point me to an up-to-date version or one that will
work with multiple doors? Currently using myq lite with ST combined with regular contact sensors. TIA!
But you will also need the momentary button tile driver if you want to have an open device and close device or have a door with no sensor. But if your want to use a contact sensor and just control with the main device, this app and driver are all you need.