Cant get my Tuya Motion sensor to work

[n1fcc1]

_TZ3000_msl6wxk9

c8
2.3.9.201

I added the package manager and picked what seemd to be the correct device driver, however it still shows as unknown device.

Any ideas?

Dave

[Ranchitat]

Welcome to the community!

This is probably the driver and thread you should be using/posting on:

[RELEASE] Tuya Zigbee Multi-Sensor 4 In 1 (PIR motion sensors) w/ healthStatus

The mmWave sensors support is moved from this driver to a new dedicated driver : This driver can be installed from Hubitat Community Package Manager (HPM). Search for "Tuya Zigbee Multi-Sensor 4 In 1" or tag "Zigbee" If you have already installed the driver manually, please do a Match search in HPM and then check for any updates. The driver can be installed manually from: https://raw.githubusercontent.com/kkossev/Hubitat/main/Drivers/Tuya%20Multi%20Sensor%204%20In%201/Tuya%20Multi%20Sensor%…

Also have a look HERE to make sure your post has all the suggested info included.

And, it's good practice on lots of ZigBee devices to perform the pairing procedure again after you change drivers.
Don't delete anything on your hub, just put the ZigBee device into pairing mode, and click on the Start Zigbee pairing button on the HE hub.

[Hal3]

Warning: I am not an expert!
I have occasionally facilitated pairing of a balky Zigbee device by pairing it close to the Hub. Good luck!

[n1fcc1]

This isnt a paring issue. They paired nicely, its getting them working in my dashboard and providing activity to my automation. The show up as unknown devices

[kkossev]

Join the Hub Owners group in this forum :

https://community.hubitat.com/g/owners

Then, you will be allowed to post screenshots.

Please post a screenshot of the device web page ‘State Variables’ section, also a second screenshot of the Device Data details