Any driver for hue wall switch module?

I have a bunch of these, they work like a contact sensor to convert existing switches in Your house to a hue switch... I would like Them in hubitat so i can control more than lights...

some debug information from the device:

COPY AND PASTE THIS ROW TO THE DEVELOPER: fingerprint model:"RDM001", manufacturer:"Signify Netherlands B.V.", profileId:"0104", endpointId:"01", inClusters:"0000,0001,0003,FC00", outClusters:"0003,0004,0006,0008,0019", application:"09"

d=[nwkAddrOfInterest:E7AB, endpointId:01, profileId:0104, applicationDevice:0820, applicationVersion:01, inClusters:0000,0001,0003,FC00, outClusters:0003,0004,0006,0008,0019], ll=26, icn=4, ocn=5

Simple Descriptor Information Received - description:catchall: 0000 8004 00 00 0040 00 E7AB 00 00 0000 00 00 9C00ABE71A0104012008010400000100030000FC0503000400060008001900 | parseMap:[raw:catchall: 0000 8004 00 00 0040 00 E7AB 00 00 0000 00 00 9C00ABE71A0104012008010400000100030000FC0503000400060008001900, profileId:0000, clusterId:8004, clusterInt:32772, sourceEndpoint:00, destinationEndpoint:00, options:0040, messageType:00, dni:E7AB, isClusterSpecific:false, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:00, data:[9C, 00, AB, E7, 1A, 01, 04, 01, 20, 08, 01, 04, 00, 00, 01, 00, 03, 00, 00, FC, 05, 03, 00, 04, 00, 06, 00, 08, 00, 19, 00]]

From the fingerprint you pasted it looks like you may be using one of Markus’ Zigbee drivers. I presume in that case that you have already tried the generic Zigbee switch driver (the built in one that is, not Markus’). When switching between drivers, don’t forget to hit the Configure button as well.

yes i am using: Zigbee - Generic Device Toolbox from Markus to get some debug info..

i tried the build in generic zigbee switch and some other switches without luck... any suggestions on some custom drivers to try out? (tried philips hue dimmer driver as well)

Have you tried Markus’ generic Zigbee switch driver (not the toolbox one)?

i just ordered one of these, so we'll likely have a driver for it in the next release (2.3.1)


yea tried that one... no succes...

@mike.maxwell sounds great... any luck for making it an open driver to import on an older firmware version?

i have 2 hubs, one running and older firmware because some device broke on newer versions..

why don't we get this problem fixed?

it is the Fibaro Universal Sensors... there was lots of discussions about it - but it seemed it never got to work on newer versions - i think it was buried because of other more important tasks

there was also problems with aeotec doorbell in later versions... so i am still running on the primary hub...

i have a secondary hub (c7) just for testing

i have lots of fibaros integrated in my home.. and the C7 is the brain in all of my systems (and it has been rock solid)

newer versions?
Are you saying you have UBS devices running on a C7 hub, and if so what platform version?

If I recall the UBS issue is related to those sensors using out of spec Z-Wave commands that are not supported on the latest 700 series Z-Wave stack.

1 Like

there was a work-around driver which made use of "scenes" for the UBS

however.. i am willing to ditch those device and buy fibaro smart implants instead...

i would really like these Philips wall switch modules to work on my "hubbi" :smiley:

have you gotten any progress with this ? :smiley:

Yeah, unfortunatly I'm going to have to join it to a hue bridge to fetch the configuration settings as the usual type of stuff didn't work. This can be a tedious process so I don't have any timeline for it.

is there anything i can assist with ?
i would very much likes these devices directly in HE as it is the perfect "dry-contact" sensor :smiley:

if someone wants to capture the frames on wireshark while it joins the hue bridge, that would save me some time...

Sorry, I havent got a Zigbee sniffer dongle

is it possible to extract anything from the hue hub bridge directly somehow?

Unfortunately not.

Hi Mike, any progress on a driver for th Hue Wall Module? Against all hope, looks like this is going to be my best option for zigbee remote with normal decorative switches.

Hi @mike.maxwell, any progress on this? Does this cover what is needed in lieu of packet sniffing?

The driver for this will be in platform 2.3.2


any hints on a possible release date for 2.3.2 ? :smiley:

Download the Hubitat app