2.2.9.140 - Hung on "verifying download"

🛎️ Get Help
1

Just updated two C7s from 2.2.9.138 to .140. Both completed successfully, but the update status messaging didn't display/update properly.

First C7: Screen hung on "Verifying..." page through entire update. Refreshed page and showed current version was updated to .140.

2021-10-23 11_02_42-Update Hubitat Elevation®
2021-10-23 11_02_42-Update Hubitat Elevation®780×384 18.6 KB

image

Second C7: Screen hung on Download progress:

2021-10-23 11_12_01-Update Hubitat Elevation®
2021-10-23 11_12_01-Update Hubitat Elevation®764×376 21.2 KB

Refreshed and showed below.
image

2

This is not good! Similar behavior to what I've been dealing with for the last several versions.

3

my updaes all worked just went to 140 no issues

2 Likes
4

Must be nice :neutral_face:

1 Like
5

not trying to be obnoxious just that oit is not everyone.. maybe database corruption. not sure how to tell. maybe try an older restore than update>

2 Likes
6

Just to clarify - the updates to .140 did complete successfully, it's just that the status reported gets hung at some point. So it's a UI issue, doesn't block the update.

7

How long did it hang for you? Mine is going on 20 minutes plus.

8

Might it be the page that hasn’t refreshed? What do you get if you do a manual refresh? 20 minutes is way too long…

9

Well the thing is that it does go away on it's own but it still shows if I go and click on the link again (update available)

1 Like
10

Or just open another tab pointed at the hub?

3 Likes
11

Mine appeared to be sitting and not changing for quite a while, at least maybe 20 minutes on the hub where it hung showing a percentage verifying the download. But I wasn't timing it so I just don't know. In all cases as soon as I refresh the page it showed the update as installed and everything was fine.

12

See, mine is actually kicking out. Like it aborts but then when I try to do it again I simply get the message that the hub is rebooting and never does. I also discovered that during that time random things are non functional. This has happened a few times. One time my devices page was accessible but individual device pages weren't. Another time dashboards had no devices authorized.

13

Have you tried rolling back using http://hubitat.local:8081 , and then doing the update again?

14

You don’t need to rollback, at least I didn’t, just reboot your hub from the hubip:8081 reboot menu option.

1 Like